10. Troubleshooting
Radio transmission is on a non-exclusive channel which is why it is
not possible to exclude errors completely.
No function
• Check the coding of the transmitter and receiver – they must
be the same.
• Check the batteries; they may be flat or inserted incorrectly.
Only functioning at short range
• Check the batteries; they may be flat or getting low.
Incorrect function
• Incorrect activation may occur as a result of overloads of radio
channels in built-up areas. If this occurs, please change the co-
ding – e.g. from 1 to 3.
11. Cleaning
Only use a slightly damp cloth, possibly with a mild detergent, to
clean the surface. Do not use any detergents containing scouring
agents or solvents.
17