Programming Remote Control Hob - Novy InTouch Bedienungsanleitung

Programming remote control hob

(make sure the remote control of the hood has been programmed first)
Connect the hob to the electrical network. Wait until you here a "biep". When the hob is
already connected start with step 1.
of the hob at the same time, until you here several "biep"
1/ Select and
2/ As soon as the Light blinks you can select one of the sensor keys
on the hob an keep it selected until several "bip" are heard.
Hob and Hood are now programmed and connected.
10