Troubleshooting - Velleman CAMSET29 Bedienungsanleitung

• Video Recording Time: changes the default length of recorded
video
• Backlight Time: changes the time the device remains powered on
(5 – 10 – 15 – 20 seconds).
• Format Micro SD card: allows formatting the Micro SD card (press
the Answer key to cancel or the Menu-OK key to confirm).
• Restore factory settings: restores factory settings (press the
Answer key to cancel or the Menu-OK key to confirm).
6.4 User manual
The User manual contains the user guide and system information.
7.

Troubleshooting

Problem
The device randomly powers
on/off.
When inserting the Micro SD
card, the device displays a
message "Insert Memory Card"
or "Param Error".
The device displays the message
"Param Error".
8. Cleaning and maintenance
Insert or replace the batteries
• Install the Micro SD card before the batteries and click the Micro
SD card. The device will only recognize the SD card if inserted
before the batteries.
• Only use appropriate batteries (see Technical Specifications
below).
1. Remove the battery lid.
2. Remove the used battery and install a new one.
Mind the battery polarity (+ and -).
3. Close the battery lid.
V. 01 – 05/02/2014
CAMSET29
Possible solution
May be caused by low batteries.
Change the batteries.
• Remove and put back the
batteries.
• Use another Micro SD card.
Reconnect the camera cable.
8 ©Velleman nv