Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Changing the tape cutter (4) (Fig. E)
1. Open the device by loosing the cross-
head screws and remove one part of
the housing of the device.
2. Loosen the screw of the tape cutter (4)
and remove it.
3. Insert the tape cutter replacement and
screw it in tight again.
4. Please take care that the lever (5) on
which the tape cutter is affixed, is placed
horizontally when re-assembling the housing.
5. Assemble the housing and screw it also in tight.
Tape replacement you can order at Westfalia under the article number 84 88 79.
Cleaning
Clean the bag sealer with a moistly cloth.
Do not use abrasives or aggressive detergents.
Design protected by copyright
4
Fig. E
5
© Westfalia 01/09
Werbung
