Dmx-Mode - EuroLite LED PAR-64 RGBW 48 x 3 W Bedienungsanleitung

Setting DMX Mode
Mode:
CH6 (default setting)
CH
(Temperature in the device
in degree Celsius)
Setting solid colors:
When the display shows C, you can select the desired solid color. Please see the following table.
Mode:
C
Setting internal programs:
When the display shows P, you can select the desired internal program. Please see following table.
Mode:
P

DMX-Mode

The Control Board allows you to assign the DMX fixture address, which is defined as the first channel from
which the LED PAR-64 RGBW 48 x 3 W will respond to the controller.
Addressing
Press the Menu-button until the display shows d. You can now set the desired address via the UP or DOWN
buttons. Press Enter to confirm.
Controlling:
After having addressed the LED PAR-64 RGBW 48 x 3 W, you may now start operating it via your lighting
controller.
Value:
CH4
t
Value:
C01
C02
C03
C04
C05
C06
C07
C08
C09
C10
C11
C12
C13
C14
C15
Value:
P01
P02
P03
P04
Endless loop in 15 colors,
P05
Endless loop in 15 colors,
P06
Function:
Red
Green
Blue
White
Neon green
Magenta
Cyan
White
Dark salmon
Lime green
Sky blue
Medium yellow
Pink
Steel blue
Cold white
Function:
Endless loop in 7 colors,
change every 3 seconds
Endless loop in 7 colors,
fade every 3 seconds
Endless loop in 3 colors,
change every 3 seconds
Endless loop in 3 colors,
fade every 3 seconds
change every 3 seconds
fade every 3 seconds
21/24 00056640.DOC, Version 1.3