Remington REVEAL MAN3000 Bedienungsanleitung Seite 5

TREATMENT TIPS
• Always guide the attachments carefully over the surface to be treated and without
applying too much pressure.
• Slowly move the device over the areas to be treated and in circular movements.
• Always work from the outside of the nail towards the tip.
• The cutting attachments will not be as effective if the skin is softened or moist.
Therefore always use on dry skin.
• After each use, apply moisturising cream to the treated areas.
ATTACHMENTS
NEEDLE MILLING CUTTER
This is a precision attachment which is for the removal of ingrown nails and cutting away
dead nail parts. Carefully remove the areas of nail as required and use on the lowest speed
setting.
FLAME MILLING CUTTER
For the removal of ingrown nails. Use with care and on the lowest speed setting
SAPPHIRE CONE
For filing and manicuring the nails, or removing dry skin. Ideal for use on larger areas.
CYLINDRICAL MILLING CUTTER
Use this attachment for the grinding and smoothing of lignified nails. Remove the layers by
using in a circular motion.
TAPERED CALLUS RASP
For removing hard skin and calluses.
FELT CONE
For polishing and shining the nails after filing, this attachment can also be used for cleaning
the surface of the nail. Use in circular movements. Do not use in one area for too long as heat
can quickly build up.
SANDPAPER BARREL ATTACHMENT AND REFILLS
Slide a sandpaper refill onto the attachment (FIG B) before use. Best for removing hard skin
and calluses on the sole of the foot and heel. Ten sandpaper refills are included. Discard
each refill after use.
SAPPHIRE DISK (FINE)
For gentle filing of the nails. Can be used with precision as it is only the inner disk that
rotates. Use on the low speed setting for better control.
SPARES
Contact your local service agent for information on how to purchase replacement parts. See
the enclosed guarantee card for details.
ENGLISH
GB
DE
NL
FR
ES
IT
DK
SE
FI
PT
SK
CZ
PL
HU
RU
TR
RO
GR
SI
HR
UA
BG
AE
5