Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Output voltage is too low.
A C C E S S O R I E S
More information on our website
M A I N T E N A N C E
To keep your inverter operating properly, there is very little maintenance required. You
should clan the exterior periodically with a damp cloth to prevent accumulation of dust
and dirt. Also check periodically:
All wires and connections. Replace damaged wires immediately.
-
The ventilation vents.
-
ATTENTION: turn off the inverter before you start the maintenance activities.
W A R R A N T Y A N D S E R V I C E
Before sending back the inverter, always advice the Trouble Shooter and other
information in this manual firstly. If a problem could have been solved by means of this
manual, we are obligated to charge the repair/research costs. In case of a malfunction,
the inverter can be send to us directly or you can choose to arrange the return with your
dealer. The inverter must be send prepaid. The PE inverters carry a one-year warranty.
This warranty only covers the costs of parts and labour for the repair. The warranty
period is only valid when the purchase ticket is handed over with the repair. The
warranty will lapse when a third party has attempted to repair the inverter or when the
inverter is not installed or used in accordance with the instructions. Do not attempt to
repair the inverter yourselves.
The manufacturer cannot be hold responsible for any damage resulting from use of the
PE inverter.
You are measuring the
voltage with a normal
voltmeter.
Input voltage is too low.
RC 010S
Remote control. Incl. 10mtr. cable
CP 823
Automatic switch between inverter and mains or generator.
www.xenteq.nl
The voltage of a modified
sine wave cannot be
measured with a normal
voltmeter. To perform this
measurement a true RMS
voltmeter is required.
Ensure that the input voltage
remains higher then
11.5Volts (12 V system) or
23Volts (24 V system).
English
12
Werbung
