Sony SFD-FX200U Bedienungsanleitung Seite 13

5
Choose the language of operation, then follow the on-
screen instructions.
6
When installation is complete, remove the installation CD-
ROM.
7
Reboot the PC.
8
After the PC has rebooted, connect the HiFD drive and the
PC using the USB cable. (For the connection method, see
page 15.) All necessary devices are installed automatically,
then the HiFD drive is ready to use.
Precaution on Installation
If the installation is performed without following steps 1-9 and
with the HiFD drive connected, the drive may not be
recognized even by running "Setup.exe" on the CD-ROM. If
this happens re-install the driver according to the procedure
below.
1
There will be an Unknown device registered in Other
devices in the Device Manager. Remove This Unknown
Device. (Unknown Device is not displayed unless the
HiFD drive is connected.)
2
Click [Next] twice.
3
Select Specify a Location and specify the installation
folder set with the Setup. (the default is C:\HiFD)
13