E-FLOR AL 18 LI Bedienungsanleitung Seite 18

Electrical safety
Always check if the battery voltage corresponds to that indicated on the
type plate. Also check if the mains voltage corresponds to the input coltage
of the battery charging device.
7. Service
a. Only have your device repaired by qualified, specialised personnel, and only carry out
repairs using original replacement parts. This ensures that the safety of the device
remains unimpaired.
b. For electric appliances with the attachment X, where a specially made connecting
line is required for the exchange of the connecting line: If the connecting line of the
power tool is damaged, it must be replaced with a specially made connecting line
which is available from the client service organisation.
Assembly
Take the device out of the packaging. Before assembly, do not connect it to the mains
and do make sure that the battery is not inserted in the device. This also applies during
all adjusting tasks.
Assembly of the leaf blower (fig.1)
Connect the two parts (06 + 07) of the blow pipe to each other (push fit). Push the lock
button and connect the two parts to the handle.
Switching the device on/off
The air flow speed can be regulated using the 2-stage controller.
a. Stage 1 = air flow speed approx. 128 km/h
b. Stage 2 = air flow speed approx. 192 km/h
1197940 BDA AL 18 LI.indd 17
fig. 1
17
10.10.12 10:43