E-FLOR AL 18 LI Bedienungsanleitung Seite 13

Technical data
Nominal voltage:
Air flow speed:
Air flow speed:
Rotation speed:
Noise pressure level:
Uncertainty
Noise power level:
Uncertainty
Vibration:
Uncertainty
Protective class:
Battery:
Nominal output:
Battery capacity:
Charging time:
Power supply unit:
Input voltage:
Output voltage:
Charging current:
Protective class:
Read operating instructions
Wear hearing protection, protective goggles and gloves
Do not use in rain; protect from wetness
Keep other persons at a distance
Only use the power supply unit in dry rooms
The power supply unit is equipped with a safety isolating transformer
Warning, the cutting tool continues running after being switched off
SWITCHING THE DEVICE OFF: Before cleaning or maintenance
pull the mains plug or remove the battery.
AHS GmbH, Uhlandstraße 50, A-4600 Wels
Intended use
The device is suitable for the cleaning of paths, courtyards or garage driveways and other
areas in private domestic and hobby gardens.
Only use this machine according to its intended use! Any use extending beyond this does
not constitute intended use. The user, not the manufacturer, is liable for resulting damages
or injuries of any kind.
Our equipment is not intended for commercial or industrial use. If this device is used in the
context of commercial or industrial use, the warranty is void.
1197940 BDA AL 18 LI.indd 12
Stage 1 approx. 128 km/h
Stage 2 approx. 192 km/h
approx. 4 hours
12
18 V
13,000 rpm
L 80.5 dB(A)
PA
K 3 dB(A)
PA
L 91.4 dB(A)
WA
K 3 dB(A)
WA
4.747 m/s²
K = 1.5 m/s²
III
Lithium ions
18 V
1,300 mAh
230 V ~ 50 Hz
21 V
300 mA
II
10.10.12 10:43