AUDIOLINE BigTel 150 Bedienungsanleitung Seite 56

Setting the telephone
Memory on
Auto reset
Off
Setting the contrast
Setting the handset name
Setting Auto Answer
☞
If Auto Answer is on an incoming call will immediately be taken when the
handset is taken from the base.
20
/ Select Boost and press OK.
/ Select one of the following options and press OK:
Select this setting to activate the boost function permanent-
ly. This allows you to set the earpiece volume up to level 10
/ refer to the note on page 3.
Select this setting to activate the boost function only for the
current call. This allows you to set the earpiece volume up
to level 10 / refer to the note on page 3.
Select this setting to deactivate the amplification. You can
set the earpiece volume in 5 levels.
Press the menu key.
/ Select HS setting and press OK.
/ Select LCD contrast and press OK.
/ Select the desired contrast and press OK.
Press the menu key.
/ Select HS setting and press OK.
/ Select Handset Name and press OK.
Use
required (max. 10 characters).
Use
Press OK to finish.
Press the menu key.
/ Select HS setting and press OK.
/ Select Auto Answer and press OK.
/ Select On or Off and press OK.
to delete characters then add new characters as
to switch to capitals and back again.