Lcd-Display - JBSystems usb 2.2 Mk2 Bedienungsanleitung

ENGLISH
21. LCD DISPLAY: Shows all important information needed during playback. Refer to the next chapter for
more information.
22. FADER START Sockets: If you are using a mixer with fader start function, connect the player with the
fader start of the mixer. Please note that these sockets must never be connected with any voltage.
23. CONTROL connector: connect this connector to the main unit, using the supplied mini-DIN8 cable.
LCD DISPLAY
1. PLAY/PAUSE indicators: displays the status of the player.
2. CUE: appears when the master cue point is programmed.
3. SINGLE: appears when the unit is set to play just one track at a time. When it is not shown, the player
plays continuously through all tracks.
4. FOLDER/SEARCH KEY indicator: the information depends on the lookup mode you selected.
 Standard lookup: (no Track-Indexer database) the current folder number is shown.
 Database lookup: the current search key (Art, tit, Alb or Gen) is shown.
5. TRACK indicator: shows the number of tracks available in your current selection.
 Standard lookup: (no Track-Indexer database) the track numbers in the current folder are shown.
 Track-Indexer lookup: the track numbers that correspond to your Track-Indexer pre-selection.
6. TIME BAR: shows either remaining or elapsed time. Starts flashing at the end of each track to alert the
user to take action.
MINUTE: Shows "minutes" time information of current track.
7.
SECOND: Shows "seconds" time information of current track.
8.
FRAME: Shows "frame" time information of current track. (1 frame = 1/75
9.
10. ELAPSED, REMAIN: indicates that the time shown on the display is the elapsed or remaining time for
the playing track.
Note: for MP3 files it's not possible to show the total remaining time for all tracks on the CDROM.
11. ALPHANUMERIC DISPLAY: Shows the names of folders and ID3-tags of MP3 tracks.
12. RANDOM: Is lit while player1 is switched to random mode.
13. AUTO CUE: appears when the "auto cue" function is active.
14. LOOP/RELOOP: LOOP shows when a loop is programmed. When a loop is programmed and currently
playing, the RELOOP indicator is flashing.
15. PITCH DISPLAY: Shows the actual percentage of speed change, selected with the SPEED slider (14).
16. Padlock: is shown when the pitch lock function (Master Tempo) is active.
17. BPM DISPLAY: shows the output of automatic beat-counter, measured in beats per minute.
JB SYSTEMS
®
7/82
OPERATION MANUAL
th
sec.)
USB2.2 MK2