JBSystems usb 2.2 Mk2 Bedienungsanleitung Seite 11

ENGLISH
 Put the files on an EMPTY (important!) USB-stick.
 Press the TIME button (19) of the left player for about 3seconds to enter the setup menu.
 Use the TRACK knob (9) to browse to menu option "4. Version"
 Press the TRACK knob (9) to select the menu option
 Turn the TRACK knob (9) until the display shows "Upgrade".
 Use the SOURCE SELECT button (18) of the left player to select USB1 input (4).
 Insert the USB-stick with firmware files in USB1-input (4)
 Upgrading will start automatically: WAIT (!) until the upgrading process is finished. NEVER turn the
player off while upgrading the software!!!
 If the display asks you to turn off the unit: turn the unit off, wait 3seconds and turn it back on.
 Check if the software version corresponds to the version marked in the readme file that came with the
update.
INSTALLING THE TRACK-INDEXER SOFTWARE
The USB2.2 MK2 MK2 works perfectly without the Track-Indexer database files but if you want to search
your tracks easily and lightning fast than you should install the Track-Indexer software on your computer!
Please note that the program currently only works under Windows (XP, Vista, Win7). To be sure that you
always have the latest version, you can download the software from the USB2.2 MK2 MK2 product page on
our website. Installing the program is very easy: just double-click the file and follow the instructions on your
screen.
USING THE TRACK-INDEXER SOFTWARE
Each time you add or remove tracks from your USB hard disk,
you must run the TRACK-INDEXER software again to update the Track-Indexer database files!
After the installation you will see a new program directory called "JB". In this directory you will find 2 files:
- Uninstall (to uninstall the software)
- DbBuilder (to start the software)
 Connect your USB-hard drive to your PC and check which drive letter
was assigned to it.
 Click on the Track-Indexer icon to start the software: the main screen
is shown.
 In the upper center choose your USB-drive.
 Press the BUILD-button.
 The software starts scanning the USB-drive for compatible audio
files and extracts the ID3-tags to build the Track-Indexer
database files, needed to speed up the search function on the
player. Once the progression bar on the bottom is full, the
database building process is finished and a short summary is shown.
 The program wrote the Track-Indexer files (file extensions: .DBH + .dat + .DBX) to the USB-drive so now
you can remove it from your PC and connect it to the USB2.2 MK2 MK2.
To achieve the best results, please always use the latest version of the Track-Indexer database software.
You can find the software version at the bottom left of the "About" screen.
! IMPORTANT MESSAGE FOR VISTA USERS !
Many Vista users will not be able to run the Track-Indexer software.
This problem is caused by the UAC (User Account Control) limitation,
a security option limiting the user privileges in Vista. To overcome this
problem, right-click the Track-Indexer program icon and choose "Run
as administrator" in the popup menu. Windows will respond with the
window shown on the right: just click "Allow".
JB SYSTEMS
®
9/82
OPERATION MANUAL
USB2.2 MK2