Options - AEG FFB41600ZW Benutzerinformation

10 www.aeg.com
How to deactivate the rinse
aid empty notification
The appliance must be in programme
selection mode.
1. To enter the user mode, press and
hold simultaneously Delay and
Option until the indicators
the display is blank.
2. Press Start.
• The indicators
off.
• The indicator
flashes.
• The display shows the current
setting.
–
–
3. Press Start to change the setting.
4. Press on/off to confirm the setting.
6.4 AirDry
AirDry improves the drying results with
less energy consumption.

7. OPTIONS

Desired options must be
activated every time before
you start a programme.
It is not possible to activate
or deactivate options while a
programme is running.
and start flashing and
and
= rinse aid empty
notification activated.
= rinse aid empty
notification deactivated.
,
AirDry is automatically activated with all
are
programmes excluding
To improve the drying performance refer
still
to the XtraDry option or activate AirDry.
How to deactivate AirDry
The appliance must be in programme
selection mode.
1. To enter the user mode, press and
hold simultaneously Delay and
Option until the indicators
the display is blank.
2. Press Delay.
• The indicators
• The indicator
• The display shows the current
3. Press Delay to change the setting:
4. Press on/off to confirm the setting.
During the drying phase, the
door opens automatically
and remains ajar.
CAUTION!
Do not try to close the
appliance door within 2
minutes after automatic
opening. This can cause
damage to the appliance.
CAUTION!
If children have access to the
appliance, it is advised to
deactivate AirDry as opening
the door may pose a danger.
and start flashing and
are off.
still flashes.
setting: = AirDry activated.
= AirDry deactivated.
.
,
and