Programmed Play; Playing Back Music In Mp3 Format; Aux In Socket; Cleaning And Maintenance - AEG SR 4362 Bedienungsanleitung

ALBUM (7)
Press this button repeatedly in order to select the next folder
during MP3 playback (if more than one folder is available).
Music playback of the selected folder starts.

Programmed Play

This can be used to program any desired sequence of tracks.
(Only in CD-/USB mode)
1. Press the STOP button (11).
2. Press the MODE button (10). "P01" (Storage space) and
the notification "PROG" will appear in the display. Use
the / buttons (8) to select the desired track and then
press the MODE button again. The display changes to
memory slot P02.
3. Select the next track with the / buttons and press the
MODE button again. Repeat the procedure until all the
desired tracks are selected.
NOTE:
Once the storage capacity of the tracks to be pro-
grammed has been reached "FUL" flashes in the
display.
4. Press the PLAY/PAUSE button (6). The playback starts.
The notification "PROG" will appear additionally in the
display.
5. Press once the STOP button to stop the playback while
retaining the program.
6. To play the programme back again, press the PLAY/
PAUSE button.
The device stops automatically after all programmed titles
have been played. The programmed sequence remains in
the memory until you switch to another mode or replace the
CD or USB storage device.
Deleting a programmed sequence
To delete the program, press the STOP button twice. The
notification "PROG" will disappear.

Playing back Music in MP3 Format

With this device it is possible to play back pieces of music in
MP3 format. The device also supports all standard CD types:
CD, CD-RW, CD-R.
This machine of is able to play MP3 CDs. Up to 200 tracks
can be compressed and stored on these CDs. Your machine
detects an MP3 CD automatically (the total number of tracks
and MP3s appears in the display). If you would like to play
one of these CDs, proceed as described under "Playing
CDs/MP3". Tracks can be programmed as described under
"Programmed Play".
Please note:
There are a number of different recording and compression
methods, as well as quality differences between CDs and self-
recorded CDs.
Furthermore, the music industry does not adhere to fixed
standards (copy protection).
For these reasons it is possible that in rare cases there are
problems with the playback of CDs and MP3 CDs. This is not
a malfunction of the device.

AUX IN socket

To connect analogue replay devices. Via this socket you can
also hear the sound of other playback devices such as MP3
players, CD players etc. through the loudspeakers.
1. Please connect the external device with a 3.5 mm stereo
jack plug to the AUX-IN socket.
2. Set the function switch (14) to the "CD/USB/AUX IN"
position.
3. You will hear the sound playback from the external device
through the loudspeakers. You may use the VOLUME
control (13) to adjust the volume. The CD buttons are not
functional.
4. For the remaining procedure please see the operating
instructions of the external sound source.
NOTE:
Adjust the volume of the external device to a comfortable
level.

Cleaning and Maintenance

WARNING!
Do not immerse the device in water.
• Always remove the mains plug before cleaning the
machine.
• Any marks on the surface can be wiped off with a slightly
damp cloth without any additives.
Troubleshooting
Symptoms Course
CD can not be CD is not inserted
played back. or inserted incor-
rectly.
Batteries too weak. Insert new batteries
CD jumps dur- Check the disc for
ing playback. fingerprints, dirt or
scratches.
English
33
Solution
Ensure that the disc is
inserted with the label
facing upwards.
or operate the device
with the mains lead.
Check the disc for
fingerprints, dirt or
scratches.