Programmed Play - AEG MC 4419 Bedienungsanleitung, Garantie

Always keep the CD deck closed.

NOTE:
• With CDs in MP3 format the current track and
folder are shown alternately in the display.
• If a disc is incorrectly inserted - or no disc has been
inserted - the symbol „- - -" and the word „NOd"
(no disc) appear in the display.
• Playback of CDs produced by the user cannot be
guaranteed due to the large variety of software and
CD media available.
Description of the CD buttons
II PLAY/PAUSE (20/6)
You can briefly interrupt and resume playback using this
button. The current track flashes in the display together
with the  symbol. Pressing again continues
I / I (SKIP +/SKIP -) (8/9/2)
With an audio CD or a CD in MP3 format playing:
With I/SKIP + you can jump to the next or previous
track etc. If the button is kept pressed down, the ma-
chine starts to search through the tracks.
The I/SKIP - button can be used as follows:
Press once = This jumps back to the previous
track.
Press twice = This plays the song before etc. If the
button is kept pressed down, the
machine starts to search through the
tracks.
 STOP (19/5)
The CD stops.
MODE (22/4)
With an audio CD or a CD in MP3 format playing:
Press once = (the REP. emits a fixed light) the cur-
rent track is repeated continuously.
Press twice = (the REP. ALL emits a fixed light) the
whole CD is played continuously.
Press three times = the display contains the word RAN-
DOM and the track number that is to
be played first. All tracks are played
back in random order.
Press four times = all functions are cancelled. The
normal play mode is resumed.
Only for CDs in MP3 format
Press once = the current track is repeated
continuously (REP. appears in the
display).
05-MC 4419 CD_MP3 AEG_Neu.indd 43
Press twice =
Press three times = the whole CD is played continuously
Press four times = the display contains the word RAN-
Press five times = the function is deactivated and the
FOLDER UP/DOWN (1 on the remote control)
playback. Press these buttons during playback in order to move
one folder upwards or downwards. The display, e.g.
F 01, appears briefly. Then the CD begins to play back
automatically. If this button is pressed in stop mode the
display also appears
II PLAY/PAUSE button

Programmed Play

This can be used to program any desired sequence of
tracks.
1. Press the  STOP key (19/5).
2. Press the PROG(RAM) key (6/3). The word PROGRAM
flashes in the display and „P01" (memory preset)
appears. Use the I / I (SKIP+/SKIP-) buttons
(8/9/2) to select the desired track and then press the
PROG(RAM) button again. The display changes to
memory slot P02.
3. Select the next track with the I / I (SKIP+/
SKIP-) key and press the PROG(RAM) key again.
Repeat the procedure until all the desired tracks are
selected.

NOTE:
Once the storage capacity of the tracks to be
programmed has been reached, the memory preset
number „P01" appears in the display.
4. Press the II PLAY/PAUSE key (20/6). The playback
starts. The selected track numbers are shown in the
display in the correct order and the symbol  DISC
or  MP3 and PROGRAM light up. Press this button
to pause briefly the playback.
5. Press once the  STOP key to stop the playback while
retaining the program.
6. To resume the playback of the program press first the
PROG(RAM) key once and then the II PLAY/PAUSE
key.
7. To delete the program, press the  STOP key (19/5)
twice. The PROGRAM control lamp goes out.
English
the selected folder of the MP3 CD
is repeated continuously REP. ALBUM
appears in the display). With the
FOLDER UP/DOWN buttons (1 on the
remote control) you can select the
individual folders.
(REP. ALL appears in the display).
DOM, MP3 and the track number
that is to be played first. All tracks
are played back in random order.
CD is played in the normal mode.
briefly. Then start playback with the
(20/6).
02.03.2010 14:25:56 Uhr
43