Sensor Assembly - Htronic WPS 1000 Bedienungsanleitung

danger!
accessible. Make sure that you pull the mains plug out of the socket
before opening the device.
– Avoid direct water contact (spray or rain), dust and direct sunlight with the
main unit.
– Electrical components do not belong into the hands of children.
– All persons using, handling, installing, servicing and maintaining this device
must be trained and qualified for handling and repairing this device and
follow this user guide!
– When used in commercial facilities, the safety regulations of the professional
trade association for electrical installations and equipment must be followed.
– The use in schools, training centres, hobby-self-help workshops and the ope-
ration of components is to be supervised by trained personnel.
– Only original spare parts may be used, if the device is in need of repair. The
use of other components can be hazardous and can cause damage.

sensor assemBly

Mount the water level sensors at the points that you want to monitor. The sensor
responds to water contact at the two metal contacts. The sensor circuit is then
closed. The mounting height of the sensor defines the response point when the
functions of the main unit are activated. The sensor cable can be extended up
to 20 m with a double wire.
(Fixing screw and
assemBly
dowel not included)
Fixing
Bef.-Schraube
screw
Water
Wassersensor
sensor
When opening the device, live electrical components are
dowel
Sensor
Wandschelle Dübel
(Sensorhalter)
holder
Water sensor
(included)
Water Level Switch WPS 1000 | 15