Technical Data; Warnings And Safety Instructions - Htronic WPS 1000 Bedienungsanleitung

technIcal data

– Power supply: 230 V/50 Hz
– Power consumption: max. 1,5 W (stand-by)
– Switching power: max. 3000 W
– Switching delay*: ca. 20 sec.
– Sensitivity: < 50 kOhm
– Class: IP 20
– Including water sensor

WarnIngs and safety InstructIons

This product has left our company in a technical perfect status. To retain this
sta tus and for safe operation of this product the user has to pay attention to the
safe ty remarks and warnings included in this manual.
Please read this manual carefully!
commissioning and handling of the product. Please bear this in mind, even
if you pass it on to other people! The law requires that this manual contains
important information for your safety and describes how the unit can be used
safely, avoiding damages to the unit and other installments. This manual is a
part of the device and should be kept in a safe place for future reference. For
defects, which occurred due to not following the manual, the guarantee will
not apply. Therefore for any such defects the manufacturer shall not accept any
product liability. To avoid malfunctions and damages, please pay attention to
the following safety instructions:
– Repairs of the unit should only be performed by a specialist!
– Dispose of the packaging material that is not needed. Children might play with
the plastic bags and risk suffocation.
– The unit and its components should not be handled by children and infants.
danger!
the device from the mains before opening it. Opening the device will
reveal components which have a live current and can be hazardous to your
health when touched. The device must not be modified or tampered without
authorization of the manufacturer.
The unit should only be opened by a specialist. Detach
It contains important information on the
Water Level Switch WPS 1000
* To prevent a continuous
switching of the relay
in case the water waves.
| 13