Storing The Measured Value - Wetecom ET1058 Bedienungsanleitung

Press in/cm-button
1x
2x
3x
4x

Storing the measured Value

1. After measuring the desired object, press the hold button (7) in order
to save the value.
2. The value on the display starts flashing. You can retract the measuring
tape but the saved value will remain on the display.
The shift key in/cm can also be pressed while flashing. So you can
see the saved value in foot or inch.
Using
Display
' '' 75
0 3 76
'' 75
3 76
''
3,9
'
0,32
10,0
c
m
12
Measuring Value in
0 foot, 3 inch with the
decimal value displayed as
fraction
3 inch and decimal value
displayed as fraction
3 inch displayed as decimal
value with one decimal place
after the decimal point
0,32 feet displayed as
decimal value with two
decimal places after the
decimal point
cm