Value Displayed In Foot And Inch - Wetecom ET1058 Bedienungsanleitung

When retracting the measuring tape, make sure not to injure yourself.
The tape moves very quickly. Preferably hold the tape on the hook and
allow it to retract slowly.
Values displayed in Foot and Inch
After switching on and using the electronic measuring tape, you will only
see the symbols of the measuring units foot, inch and centimetres.
Displayed order by pressing the shift key in/cm
' ''
Measuring value displayed in foot and inch
''
Measuring value displayed in inch
''
Measuring value in inch, displayed as decimal value with one
decimal place after the decimal point
'
Measuring value in foot, displayed as decimal value with two
decimal places after the decimal point
Measuring value in cm
cm
Example:
Initial Setting
1. Pull the measuring tape up to the displayed value
This is equivalent to 10 cm.
2. For better control and handling, lock the measuring tape with the tape
lock button (7) and press the shift key in/cm several times. The display
shows the following values:
' ''
Foot and Inch
Using
11
0' 3'' 75
76