Domo DO2723CG Gebrauchsanleitung Seite 50

DO2723CG
At this time, press "STOP/CLEAR/CLOCK" again or the time for pause is more
than 5 minutes, it will turn back to the waiting state. Press "START" within 5 minutes,
the unit goes on working and time counts down.
If you press "CONVECTION", you check the status and the temperature will be
displayed for 3 seconds, then time counts down.
5) During this process,each pressing on "START " can increase 30 seconds.When
cooking finish, the buzzer will sound five times and turn back to the waiting state.
8. Combine Function
1) Press "COMBINE" to choose the temperature. " ", " " and "°C" will light.
"100", "110", ..."190" will be displayed in cycle. It will go back to the waiting state by
pressing "STOP/CLEAR/CLOCK".
2) Input the time by turning the large round knob. The maximum time is 95 minutes.
3) Press "START " to start working.
":" stops flashing.Time counts down.
4) If you press "STOP/CLEAR/ CLOCK", the unit stops working.
At this time, press "STOP/CLEAR/CLOCK" again or the time for pause is more
than 5 minutes, it will turn back to the waiting state. Press "START" within 5 minutes,
the unit goes on working and time counts down.
5) Press "COMBINE" to check the status and temperature will be displayed for 3
seconds.
6) During this process,each pressing on "START " can increase 30 seconds. the
buzzer will sound five times when cooking finish and turn back to the waiting state.
9. Lock-out Function for Children
Lock: In waiting state, press "STOP/CLEAR/ CLOCK" and " START " at the same
time, there will be a long beep denoting entering into the children-lock state and LED
will display " 0:00 " or current time.
Lock quitting: In locked state, press "STOP/CLEAR/ CLOCK" and "START " at the
same time, there will be a long "beep" denoting that the lock is released.
10. Special Specifications
1) The maximum cooking time of "Microwave","Grill", "Defrost by time" ,
"Convection" and "Combine" is 95 minutes.
2) When the door is open, the lamp will light. If it keeps opening in 10 minutes,
the lamp will be off and the display will change to waiting states .
3) When open the door in waiting states or during setting process, the inicial display
will stay the same.It can change and set too. But the "START" key will not work.
4) Close the door, the lamp will be off. The setting can be changed. And the "START"
key can work too.
50