Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
DO2723CG
SETTING UP YOUR OVEN
Remove the oven and all materials from the carton and oven cavity. Your oven comes
with the following accessories :
- Glass tray
- Turntable ring assembly
G
- Instruction manual
A
- Grill rack
PARTS
A . Control panel
B. Turntable shaft
C. Turntable ring assembly
D. Glass tray
B
C
D
E
F
E. Observation window
F. Safety interlock system
G. Door assembly
TURNTABLE INSTALLATION
Never place the glass tray upside down. The glass tray should never be restricted.
Both glass tray and turntable ring assembly must always be used during cooking.
If glass tray or turntable ring assembly cracks or breaks, contact your nearest
authorized service center.
COUNTERTOP INSTALLATION
Remove all packing materials and accessories. Examinet he oven for any damage such
as dents or broken door. Do not install if oven is damaged.
Cabinet : remove any protective film found on the microwave oven cabinet surface.
Do not remove the light brown mica cover that is attached to the oven cavity to protect
the magnetron.
INSTALLATION
Select a level surface that provides enough open space fort he intake and/or outlet
vents.
A minimum clearance of 7,5 cm is required between the oven and any adjacent walls.
One side must be open.
Leave a minimum of 30 cm clearance above the oven.
Do not remove the legs from the bottom of the oven.
Blocking the intake and/or outlet openings can damage the oven.
Place the oven as far away from radios and TV as possible. Operation of microwave
oven may cause interference to your radio or TV reception.
Plug your oven into a standard household outlet. Be sure the voltage and the frequence
ist he same as the vlotage and the frequence on the rating label.
45
Werbung
Inhaltsverzeichnis
