Switching Off The Whirlpool Tub; Jet Nozzles; Switching On / Off; Changing The Massage Type - Duravit Jet-System E Bedienungsanleitung

6.2 Switching off the whirlpool tub

> Wait until the tub is completely drained and the 2-minute drying mode is finished
(air nozzles automatically activated, "Air" button flashes).
> Switch off the main switch.

6.3 Jet nozzles

Switching on / off

> Press the "Jet" button.
The nozzles are switched on/off (water massage).
! Turning on the jet nozzles also activates the heater and UV Hygiene Management
system.

Changing the massage type

> Press the "Jet" button until it flashes.
Setting buttons are now activated and illuminated.
> Press the " " button.
Water-and-air massage is activated.
> Press the " " button a second time.
Water massage with rotating air supply is activated.
> Press the " " button a third time.
Water massage is reactivated.

Concentrating massage intensity at foot- or back nozzles

> Turn the selector in the direction of the foot or back nozzles.
Massage intensity is concentrated at the foot or back nozzles.

Changing the direction of the massage stream

> Rotate the ball of the jet nozzle until you find the most pleasing direction for the
massage stream.

6.4 Switching on heating (optional)

Heating starts automaticallywhenever the jet nozzles are activated.
27