Kitchen Timer - Redmond SkyScales RS-741S-E Bedienungsanleitung

II. OPERATION
The Ready for Sky technology
The Ready for Sky technology enables to use the software app of the same name to
control the appliance remotely from a smartphone or tablet.
1. Download the software from the App Store or Google Play (depending on your op-
erating system) onto your smartphone or tablet.
2. Open the Ready for Sky app, create an account, and follow the prompts that appear
on the screen.
3. Enable the Bluetooth function on the mobile device.
4. Switch on the scales by pressing the
5. Open and update the list of appliances available for connection with the mobile
device.
6. Select the connected appliance from the list of available devices.
To provide stable connection the mobile device should be located within no more than
15 metres from the appliance.
Appliance use
button. All indicators will be displayed, then 0 value and the meas-
1. Press the
urement unit indicator will be displayed.
2. The default measurement unit is grammes (g indicator). By pressing the Unit
button you can replace the measurement unit with pounds and ounces (Ib oz
indicator). Adjusted parameters are saved upon the subsequent weighting.
3. Fix the container onto the scales platform in which you plan to weigh a product.
Press Tare button to reset the container weight value.
It is also possible to ignore the container weight by placing it to the scales platform
for switching on the appliance. The weight value will be automatically reset to zero
when scales are switched on.
4. Put the product into the container. Product mass will be displayed (excluding tare
weight).
5. The scales will be automatically disabled in 5 minutes at the end of operation. If
necessary, they can also be disabled by pressing and holding the
several seconds.
indicator will appear on display if the battery is low.
6
button.
button for

Kitchen timer

REDMOND SkyScales RS-741S-E can also be used for tracking cooking time.
1. Press the button. The timer indicator and the time value of 00:00 in the
minutes:seconds format are lit up solid on display.
2. Set the first symbol value by pressing the Unit button. Press
the value. Repeat the process for other symbols.
The maximum value of the timer setting - 199:59.
3. After setting the value until the last symbol and pressing the
program will start to count down in 1 second increments. When 00:00 value is
reached an audible signal will be heard.
4. To return to the weighing mode press the
press the button.
5. To disable an audible signal at the end of timer operation press the
Disabling audible signals
To disable audible signals during appliance operation press and hold down the Unit
button for several seconds. A double audible signal will be heard, after that audible indi-
cation will be dis¬abled. To enable audible signals repress and hold the Unit button.
When disabling audible signals the notification about the end of the countdown will
be enabled.
III. CLEANING AND MAINTENANCE GUIDE-
LINES
Do not use abrasive or solvent-based cleaners, metal sponges, etc. Clean the platform
with a soft damp cloth and wipe dry.
Do not immerse the unit in water or wash under running water. The scale is not
dishwasher safe.
It is advised to remove the battery, if the scale is not being in use for a long time. Store
the assembled appliance in a dry, ventilated place away from heating appliances and
direct sunlight.
During transportation and storage, do not expose the device to mechanical stress, that
may lead to damage of the device and/or violation of the package integrity.
Keep the device package away from water and other liquids.
button to confirm
button the
button. To return to the timer mode
button.