Assembly And Connection - Powerfix DRILL PUMP Bedienungsanleitung

Assembly and connection

µ
Assemble the mounting
as shown in the illustration.
Alternatively, the mounting
with screws (assembly material not supplied).
When using a gear-wheel chuck and the short drive
shaft e ...
µ
Screw the short drive shaft
µ
Insert the electric drill
µ
Now push the pump
projects into the chuck and the pins of the mounting
reception holes on the pump
µ
Now tighten the chuck with the chuck key through the recess
that the pump
µ
Tighten the cross-headed screw on the mounting
u
cannot jolt around.
µ
Attach the suction hose to the connection
a
connection
q
pump .
When using a quick-release chuck and the short drive
shaft e ...
µ
Secure the short drive shaft
µ
Insert the electric drill
chuck, into the mounting
µ
Securely tighten the cross-head screw on the mounting
is being firmly held.
y
with the clamp fastening
y
e
u
with the chuck into the mounting
q
onto the mounting
q
q
can no longer release itself from the mounting
. Pay heed to the direction of flow
e
u
, with the pre-assembled drive shaft
y
.
can also be secured to a work surface
onto the drive shaft
y
.
o
and the pressure hose to the
into the chuck.
- 5 -
t
onto a work surface,
w
of the pump
y
.
so that the drive shaft
y
are located in the
i
y
firmly, so that the drill
detailed on the
e
y
so that the drill
q
.
e
so firmly
y
.
in the
u