C) Testing The Charge Capacity Of A Rechargeable Battery - VOLTCRAFT PA-10 Bedienungsanleitung

c) Testing the Charge Capacity of a Rechargeable Battery

The Power Analyzer is also suitable for determination of a battery's charging capacity. In
this case, a drive battery must be connected to the right socket "POWER LOAD". The
charger is connected to the left socket "POWER SOURCE".
Important information!
Only use a cable suitable for the respective drive battery. The balancer con-
nection of the battery (see figure 5, item 4) must be connected to the charger's
balancer connection. The balancer connection of the Power Analyzer is not
used for this measurement.
Connection pattern for charge capacity test:
1. Battery charger
2. Power Analyzer
3. Drive battery
4. Balancer connection cable
The measuring method for testing the charge capacity corresponds to those for determina-
tion of an electric drive's power data.
32
Figure 5