Grenzwertalarm Open Collector Transistor 12 V / 50 mA Speicher 10 Messungen Spitzenwertmessung Lieferumfang 1 x Dynamometer PCE-FM 200 1 x Flachkopfadapter 1 x Hakenadapter 1 x Spitzkopfadapter 1 x Meißelkopfadapter 1 x Kerbkopfadapter 1 x Adapter für Verlängerungsstab 1 x Verlängerungsstab (65 mm)
Seite 15
PCE Instruments Kontaktinformationen Germany France Spain PCE Deutschland GmbH PCE Instruments France EURL PCE Ibérica S.L. Im Langel 4 23, rue de Strasbourg Calle Mayor, 53 D-59872 Meschede 67250 SOULTZ-SOUS-FORETS 02500 Tobarra (Albacete) Deutschland France España Tel.: +49 (0) 2903 976 99 0 Téléphone: +33 (0) 972 3537 17...
Seite 16
User Manual PC Software PCE-FM 200 User manuals in various languages (deutsch, français, italiano, español, português, nederlands, türk, polski, русский, 中文) can be found by using our product search on: www.pce-instruments.com last change: 9 April 2018 v1.0...
Seite 17
Meaning of the individual icons on the toolbar ......... 3 Operation ....................5 First use of the software ....................5 Connect to the PCE-FM 200 .................... 5 Disconnect from the PCE-FM 200 ..................5 Numerical display ......................6 Statistical data ........................6 Graphical representation ....................
We expressly point to our general warranty terms which can be found in our general terms of business. If you have any questions please contact PCE Instruments. The contact details can be found at the end of this manual. System requirements ...
The lower bar shows the statistical settings of the program that can be defined in the settings screen. The upper status bar shows the dynamic settings or data of the PCE-FM 200 which are directly taken from the connected device. These include the selected unit.
Meaning of the individual icons on the toolbar Group "Connection" Connect to the PCE-FM 200 Disconnect from the PCE-FM 200 Group "Data" Start a measurement Stop a measurement Export a series of measurements Load a series of measurements from a file Save a series of measurements in a file Group "Graphics"...
Operation First use of the software Before the PCE-FM 200 can work with the software, the assigned COM port must be set in the software once. It can be set via the “settings dialog” In addition to entering the connection data, the settings for the date and time format and for the decimal format can be made here.
"Print" dialog. Performing the measurement If an connection to the PCE-FM 200 is active, a new measurement can be started. After clicking on the corresponding icon in the toolbar ("Start a measurement"), a new dialog is displayed, with the help of which additional options, relevant for the upcoming measurement, can be determined.
Seite 26
PCE Instruments contact information Germany France Spain PCE Deutschland GmbH PCE Instruments France EURL PCE Ibérica S.L. Im Langel 4 23, rue de Strasbourg Calle Mayor, 53 D-59872 Meschede 67250 SOULTZ-SOUS-FORETS 02500 Tobarra (Albacete) Deutschland France España Tel.: +49 (0) 2903 976 99 0 Téléphone: +33 (0) 972 3537 17...