Renkforce 1538778 Serviceanleitung Seite 17

5
• Carefully detach the protective case.
7
• Cut the cable tie carefully with the side cutter.
• Make sure that cables will not be damaged during
cutting.
9
• Remove the grub screw at the side of the heatsink.
6
• Untighten the screw at the side of the heatsink.
• Remove the screw together with the bracket.
8
• Carefully remove the plug (4).
10
• Carefully pull the nozzle throat with the nozzle holder
out of the extruder in the direction of the arrow.
17