Part Name And Functions; Front Panel - Sony SDX-S500C Bedienungsanleitung

Part Name and Functions

Front panel

6
Part 1 Introduction
POWER
6
1
Data Cartridge Receptacle
Insert an AIT data cartridge here. See page 12 for information on
inserting and removing data cartridges.
2
EJECT Button
Push to remove a data cartridge from the drive.
3
STATUS Indicator
Lights when an inserted cartridge is write-protected. This indicator also
lights under the following conditions:
Drive needs cleaning
End of Tape during cleaning
Drive Malfunctioning
4
TAPE Indicator
When a AIT cartridge is installed, this indicator lights. This also lights
under the following conditions:
Inserting and removing a
cartridge
Cartridge deteriorated
1
BUSY TAPE STATUS
5 4 3
repeated long-on, short-off blinking.
repeated blinking (same on-off
interval).
repeated short-on (once or twice),
long-off blinking.
repeated blinking (same on-off
interval)
alternating long-short blinking
EJECT
2