Using Bluetooth - PURE Evoke D2 with Bluetooth Bedienungsanleitung

Using Bluetooth

If your phone or tablet is capable of storing audio files, you can use Bluetooth to stream any music stored on
your phone or tablet to Evoke.
Note: Adding a Bluetooth device varies on different mobile devices. See your Bluetooth mobile device
manual for specific information.
Preparing Evoke to stream audio using Bluetooth
1. Enable Bluetooth on your mobile device.
2. On your mobile device, select the option to add a new Bluetooth device. On some mobile devices you
may need to select the search or scan option.
3. Start the pairing process on your mobile device. Do this by selecting Evoke from the list of available
devices that appear on the mobile device's screen. This will connect automatically once paired.
You will now be able to start streaming audio to Evoke from your Bluetooth device.
Note: You will need to disconnect any connected mobile Bluetooth devices from Evoke to stream from
a different Bluetooth device. Bluetooth will automatically disconnect if you go out of range of Evoke. To
manually disconnect you will usually need to use the Bluetooth settings on your mobile device.
Note: For more help with Bluetooth, see our "Help and advice" on page 16.
EN
9