Using Bluetooth - PURE Evoke D6 Bedienungsanleitung

Using Bluetooth

You can also stream audio to Evoke from a Bluetooth device.
Note: Adding a Bluetooth device varies on different mobile devices. See your Bluetooth mobile device
manual for specific information.
Preparing Evoke to stream audio using Bluetooth
1. Enable Bluetooth on your mobile device.
2. On your mobile device, select the option to add a new Bluetooth device. On some mobile devices
you may need to select the search or scan option.
3. Start the pairing process on your mobile device. Do this by selecting 'Evoke D6...' from the list of
available devices that appear on the mobile device's screen. This will connect automatically once
paired.
Any audio you play on your mobile device will now be streamed to your Evoke.
Note: You will need to disconnect any connected mobile Bluetooth devices from Evoke to stream from
a different Bluetooth device. Bluetooth will automatically disconnect if you go out of range of Evoke. To
manually disconnect you will usually need to use the Bluetooth settings on your mobile device.
Note: Some legacy Bluetooth devices may prompt you to enter a passcode when trying to pair with Evoke.
If this occurs, enter the code 0000.
EN
11