Maintenance; Changing The Batteries - Num'axes Eyenimal Gebrauchsanleitung

•
Press ENTER when you are done.
Setting additional times and amounts
•
Press and hold ENTER to begin programming additional meals.
•
Repeat the above meal time and meal amount instructions for up to two additional meals, selecting the desired
meal number (1,2 or 3) to be programmed.
Optional Manual Feeding
•
You can also choose to feed your pet any time you want.
•
Press and hold the UP button for 3 seconds
•
The AMOUNT icon will appear and start blinking.
•
Press UP and DOWN buttons to increase or decrease the amount of food you want to be dispensed.
•
Press ENTER to set the AMOUNT. The motor should start rotating to start dispensing food.
•
Repeat if necessary.
NOTE: If After following the above manual feeding instructions the motor does not rotate after 5 seconds, an "Err"
message will appear on the LCD Control Panle. This indicated a jam in the dispensing mechanism. To clear this message
follow these instructions:
•
Switch OFF the main power button and wait 3 seconds.
•
Switch ON the main power button to restart the Electronic Pet Feeder.
•
In the case of an error, the stored memory for the current time and feeding schedule will need to be re-entered
using the above programming instructions.
NOTE: To prevent this error, always make sure the feeding bowl is NOT averfilled, especially near the discharge
opening from the hopper to the bowl. The dispensing mechanism will jam if the feeding bowl is too full and the
Electronic Pet Feeder continues to dispense food.

CHANGING THE BATTERIES

NOTE: Your programming information is stored and will not be lost when you change the batteries.
•
You need to replace the batteries when the LOW BATTERY WARNING LIGHT comes on, OR if your Electronic
Pet Feeder will be unattended for a long period of time.
•
Repeat the above "Battery Installation" instructions to replace.
CARING FOR YOUR PET FEEDER
NOTE: All components of the Electronic Pet Feeder are detachable for easy cleaning.
•
Hand clean with a slightly damp cloth.
DANGER: RISK OF ELECTRICAL SHOCK – If using an AC adaptator, DO NOT attempt to access or
modify the internal body compartments. There are no serviceable parts. To reduce the risk of
electrical shock, do not expose this unit to water, rain, or moisture. Never reach a unit that has fallen
into water or other liquid. Unplus immediately and discontinue use.
DANGER: POTENTIAL FIRE HAZARD – Only use a UL-certified AC Adapter that complies with
required output specifications stated below.

MAINTENANCE

•
NEVER soak or submerge in water
•
Store in a cool, dry location away from sunlight.
These are safety alerts symbols used to alert you to potential personal injury hazards
throughout this manual. Obey all safety messages that follow these symbols to avoid
possible injury or death.
11