Inhaltsverzeichnis
Werbung
3
PROGRAMMING THE MULTIPLEXER
To access the menu screen of the Multiplexer, press ALT followed by MENU. The Main Menu displays the following two programming
setup options: Quick Setup and Advanced Setup. Choose the Advanced Setup option by using the arrow keys, then press SELECT.
NOTE: Reference the LTC 2600 Series Installation Instructions for further instructions on programming the Multiplexer.
1. Execute the following Multiplexer Advanced Menu command to select VEXT ON:
ADVANCED SETUP → VCR SETUP → RECORD SETUP VCR OUT → VEXT INPUT
2. Execute the following Multiplexer Advanced Menu command to select the DVR1 as the VCR type:
ADVANCED SETUP → VCR SETUP → RECORD SETUP VCR OUT → SELECT VCR
3. If using the optional RS-232* connection between the DVR1 and Multiplexer, execute the following Multiplexer Advanced Menu
command to select PC Printer Setup to VCR and Serial Port to 96,N,8,1.
ADVANCED SETUP → PRINTER SETUP → CONNECT TO VCR → "SERIAL PORT 96,N,8"
4
PROGRAMMING THE DVR1
In order to view the DVR1's menu screen through the Multiplexer's MON A output, follow these instructions to access the VCR test mode.
• On the Multiplexer, press ALT, then VCR.
• On the DVR1, press MENU.
1. Execute the following DVR1 Advanced Menu command to select PHILIPS as the Multiplexer:
ADVANCED MENU → MULTIPLEXER FORMAT → "PHILIPS"
2. If using the optional RS-232* connection between the DVR1 and Multiplexer, execute the following Multiplexer Advanced Menu
command to select Baud Rate to 9600.
ADVANCED SETUP → COMMUNICATIONS → BAUD RATE → "9600"
5
OPTIONAL EQUIPMENT
The DRS includes the following optional equipment:
• P/T/Z control of cameras via a Multiplexer Keyboard (only System4
• Remote Viewing of video using the Remote Viewer Software and a PC.
• Control of several DVR1 functions (stop, play, rewind, fast forward, pause) through the Multiplexer front panel and/or Keyboard
utilizing the RS-232* control.
• Archiving options utilizing the SCSI port on the DVR1.
Further information regarding connection of optional equipment may be found in the instruction manuals provided with the DVR1/DRS.
Multiplexer
CONSOLE
VCR
SVHS IN
VCR
MON B
KEYBD
IN
OUT
ALARM
SVHS OUT
SDA
DVR1
Keyboard
* NOTE: The RS-232 control option is only available with the 9- and 16-channel versions of System4
PHILIPS
PHILIPS
MON A
1
2
3
4
5
6
7
8
9
10
11
ACCESSORIES
ETHERNET
1 ALARM
1
5
2 ALARM
10/
3 RECORD
IN
4 ALARM RECORD
OUT
100
5 VEXT PULSE
START IN
6
9
6 ERROR
RESET
7
OUT
8 VIDEOLOSS
OUT
12 VDC
GROUND
OUT
9 DISK END
OUT
Ethernet
Figure 3 Complete System (Optional Equipment Shown)
Multiplexers).
®
Audio (optional)
Microphone
12
13
14
15
16
RS- 232
SVHS IN
AUDIO IN
VIDEO IN
SCSI
AUDIO OUT
VIDEO OUT
SVHS OUT
SCSI
Network
3
"ON"
"DVR1"
PHILIPS
(optional)
Tape Archive
or CD-writer
®
Multiplexers.
Werbung
Inhaltsverzeichnis
