D) Battery (Remote Control); E) Av Cable Assignment - Conrad MEDIA PLAYER Bedienungsanleitung

d) Battery (Remote Control)

The supply voltage for the remote control is provided by a button-cell battery type CR2025.
Batteries must be replaced when the range is strongly decreased or the media player no longer
reacts to the remote control.
To replace the button-cell battery, push the notched plastic part to the remove control's centre
and pull out the battery compartment at the same time. Now you can insert the new battery.
Then push the compartment back into the remote control.
Make sure that the polarity is correct when inserting the batteries! It is marked with
a + at the battery compartment.

e) AV Cable Assignment

PIN 1 CVBS (Video signal)
PIN 2 Left audio signal
PIN 3 Right audio signal
PIN 4 Earth/GND
39