Connecting to AC power
Connect one end of the
accessory power cable to the
photo frame, and then connect
the power adapter to a power
socket.
Powering on/off the photo frame
Turn the power switch to the ON position to
power on the photo frame. When power is
turned on, the power indicator will light up.
To power off the photo frame, turn the power
switch to the OFF position.
Using your memory card / USB Flash drive
To insert a memory card, gently push
the card until the card reaches the
end of the slot. To use your USB
Flash drive, connect the USB drive as
indicated.
Note:
1)
The photo frame can support CF/
SD/MMC/MS Pro cards of up to 4 GB
capacity.
)
Make sure the memory card is not
corrupt or damaged before using it.
USB
CF
4
Power indicator
Power switch
SD/MMC/MS Pro