Werbung
Verfügbare Sprachen
Verfügbare Sprachen
10 ports USB 2.0 hub with power adaptor
Item no. 97 36 66
1.
Intended use
This product serves to connect up to ten additional USB devices. It has been designed
to be connected a computers with USB interfaces. During operation it operates like a bi-
directional repeater, which repeats USB signals as required on upstream (computer) and
downstream (peripherals) cables. It is designed for USB 2.0 and backward compatible
with USB 1.1. Its operation requires connection with a Computer. Power is supplied via a
power adapter. Only operate the USB hub in dry indoor room.
Unauthorized conversion and/or modification of the device are inadmissible because of
safety and approval reasons (CE). Such acts invalidate the warranty. Any usage other
than described above is not permitted and can damage the device and lead to associated
risks such as short-circuit, fire, electric shock, et cetera. Please read the operating
instructions thoroughly and keep the operating instructions for further reference.
All company names and product designations contained herein are trademarks of
the respective owners. All rights reserved.
2.
Content of delivery
•
Hub
•
USB cable
•
Power adapter
•
Operating instructions
3.
Safety instructions
Read the operating instructions carefully and especially observe the
safety information. If you do not follow the safety instructions and
information on proper handling in this manual, we assume no liability
for any resulting personal injury or damage to property. Such cases will
invalidate the warranty/guarantee.
Persons / Product
•
The product is not a toy and should be kept out of reach of children and pets!
•
Never touch electric devices with moist, or wet hands. Electric shocks are possible.
•
When used in conjunction with other devices, observe the operating instructions and
safety notices of connected devices.
•
The product must not be subjected to heavy mechanical stress or intense vibration.
•
Only operate the USB hub in dry indoor room.
•
The product must not be exposed to electromagnetic fields, extreme temperatures,
direct sunlight or dampness.
•
The product should not be used immediately after it has been brought from an area
of cold temperature to an area of warm temperature. Condensed water might destroy
the product. Wait until the product adapts to the new ambient temperature before
use.
•
If there is reason to believe that safe operation is no longer possible, the device is to
be put out of operation and secured against unintended operation. Safe operation is
no longer possible if:
-
the device has sustained visible damages,
-
the device no longer works,
-
and the device was stored under unfavourable conditions for a long period of
time,
-
the device was subject to considerable transport stress.
Miscellaneous
•
Servicing, adjustment or repair works must only be carried out by a specialist / specialist
workshop
•
If any questions arise that are not answered in this operating instruction, contact our
Technical Advisory Service or other experts.
4.
Operation
1.
Connect the power adapter plug into the DC jack of the USB hub. Then plug the power
adapter into a mains outlet. One blue LED shows the hub's readiness for operation.
2.
Connect the USB-B-type plug to the hub's USB type B socket.
3.
Connect the USB A-type plug to a vacant USB port of your PC.
4.
You can connect up to ten USB devices to the hub.
5.
The hub supports Plug & Play and hot-swapping (device drivers are automatically
recognized and the devices themselves can be removed while the OS is running).
The total current consumption of all devices connected at any one time must
not be higher than 4 A.
5.
Cleaning
Use a dry and lint-free cloth to clean the product. For stronger contamination, use a cloth
that is slightly moistened with lukewarm water. Disconnect the device from the mains
Version 02/11
outlet before cleaning and let it dry before connecting again.
6.
Tips
•
The USB2.0 is USB1.1-compatible. That means that traditional USB1.1 devices can
be operated without problems on the USB2.0 hub. USB1.1 devices do not become
quicker through this!
•
The USB2.0 hub can, of course, also be operated on a USB1.1 connection, e.g. if your
PC has no USB2.0 connection.
•
An increase in speed in the data transmission is not possible here either.
•
To be able to exploit the high speed (theoretically 480 MBit/s, i.e. 60 MByte/s), all
devices must support USB2.0 - the USB device (e.g. an external CD burner) itself, the
USB hub and the USB controller in the PC.
•
In practical operation, the 480 MBit/s are not achieved. Hardly any device (e.g. hard
disk, burner etc.) is in a position to supply data so quickly. Other causes also (e.g.
simultaneous operation of other USB devices, protocol information etc.) reduce the
transmission rate.
•
USB operation is not possible in Windows safe mode or under DOS. USB keyboards
and a USB mouse do not normally work. The BIOS/setup of your PC possibly has
appropriate support (could be called e.g. "Legacy USB support"). It is possible,
however, that the USB keyboard/mouse is to be connected directly to the motherboard
and not on a USB hub.
7.
Disposal
In order to preserve, protect and improve the quality of environment, protect
human health and utilise natural resources prudently and rationally, the user
should return unserviceable product to relevant facilities in accordance with
statutory regulations.
The crossed-out wheeled bin indicates the product needs to be disposed
separately and not as municipal waste.
8.
Technical Data
Hub:
Suitable for:
USB standard:
Connections:
Transfer rate:
Operating temperature:
Operating humidity
Storage temperature:
Storage humidity:
Dimensions (W x H x D):
Weight:
Power adapter:
Input voltage:
Output voltage:
Maximum input current:
Maximum output current:
© 2011 by Conrad Electronic SE.
Microsoft® Windows 98SE/ME/2000/XP/
Vista/7™
Macintosh OS® 8.6 or above
2.0 / 1.1
10 x USB type A, 1 x USB type B
up to 480 MBit/s
0 ºC to +55 ºC
10 % to 95 %
-20 ºC to +70 ºC
5% to 95 %
105 x 18 x 105 mm
120 g
100 - 240 V/AC, 50/60 Hz
5 V/DC
0.68 A
4 A
These operating instructions are a publication by Conrad Electronic SE,
Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com). All rights including
translation reserved. Reproduction by any method, e.g. photocopy, microfilming,
or the capture in electronic data processing systems require the prior written
approval by the editor. Reprinting, also in part, is prohibited. These operating
instructions represent the technical status at the time of printing. Changes in
technology and equipment reserved.
V2_0211_02-HL
Werbung
