Herunterladen Diese Seite drucken

Werbung

B E D I E N U N G S A N L E I T U N G
Infrarot-/Bluetooth-USB-Adapter
Best.-Nr. 97 32 95
Bestimmungsgemäße Verwendung
Das Produkt ist zum Anschluss an einen USB-Port eines Computers (oder eines USB-Hubs, der an den Computer angesteckt
ist) vorgesehen. Dort dient es entweder zur Herstellung einer Funkverbindung mit anderen dazu geeigneten Bluetooth-Geräten
oder zur Datenübertragung durch Infrarot-Lichtsignale.
Alle enthaltenen Firmennamen und Produktbezeichnungen sind Warenzeichen der jeweiligen Inhaber. Alle
Rechte vorbehalten.
Lieferumfang
Adapter
CD mit Treiber/Software
Bedienungsanleitung
Merkmale
USB-Anschluss, USB1.1
Gleichzeitiger Betrieb von Bluetooth und IR möglich
Bluetooth V1.2, Class II, bis 10m maximale Reichweite
IR-Übertragung, max. 115.2KBit (SIR), Reichweite max. 1m
Installation der Treiber/Software
Installieren Sie ZUERST die Bluetooth-Software der mitgelieferten CD. Erst danach darf der
USB-Adapter an den Computer angeschlossen werden.
Legen Sie die CD ins entsprechende Laufwerk Ihres Computers ein. Wechseln Sie zum Verzeichnis „Bluetooth", dort ins
Verzeichnis „ISSC". Starten Sie das Programm „Setup.exe" und folgen Sie allen Anweisungen. Dies installiert alle für
Bluetooth erforderlichen Dateien.
Starten Sie Windows neu.
Nachdem das Betriebssystem fertig geladen ist, schließen Sie den USB-Adapter an einen freien USB-Port Ihres Computers
an. Windows erkennt neue Hardware. Installieren Sie nun den IR-Treiber.
Der von Windows benötigte Treiber ist im Verzeichnis „S110 \ IRDA" zu finden. Folgen Sie allen Anweisungen von Windows.
Nach Abschluss der Treiberinstallation können gleichzeitig sowohl Bluetooth- als auch IR-Geräte betrieben werden.
Tipps & Hinweise
Unter DOS oder im abgesicherten Modus von Windows funktioniert USB nicht (oder nur eingeschränkt für USB-Tastatur/
-Maus). Der USB-Adapter kann hier nicht betrieben werden.
Die bei Bluetooth angegebene Reichweite von bis zu 10m („Class II") ist die Freifeldreichweite, d. h., die Reichweite bei
Sichtkontakt zwischen Sender und Empfänger (ein Bluetooth-Gerät zum anderen). Im praktischen Betrieb befinden sich
jedoch Wände, Zimmerdecken usw. zwischen Sender und Empfänger, wodurch sich die Reichweite entsprechend
reduziert.
Weitere Ursachen für verminderte Reichweiten:
-
Hochfrequenzstörungen aller Art (Computer, Monitore, Handys)
-
Bebauung jeglicher Art und Vegetation
-
Leitende Metallteile, die sich im Nahbereich der Geräte bzw. innerhalb oder nahe der Funkstrecke befinden, z.B.
Heizkörper, metallisierte Isolierglasfenster, Stahlbetondecken usw.
-
Beeinflussung der Strahlungscharakteristik der Antennen durch den Abstand von Sender oder Empfänger zu leitenden
Flächen oder Gegenständen (auch zum menschlichen Körper oder Boden)
-
Breitbandstörungen in städtischen Gebieten, die den Signal-Rauschabstand verkleinern; das Signal wird in diesem
„Rauschen" nicht mehr erkannt
-
Einstrahlung von mangelhaft abgeschirmten elektronischen Geräten, z.B. offen betriebene Computer o.ä.
Bei IR-Betrieb muss zwischen den IR-Leuchtdioden von Adapter und dem von Ihnen verwendeten Gerät (z.B. ein Handy
mit IR) eine direkte Sichtverbindung vorhanden sein. Legen Sie das Gerät so, dass dessen IR-Öffnung zu der IR-Öffnung
auf dem USB-Adapter zeigt. Der Abstand sollte nicht größer als ca. 0,5m sein (max. ca. 1m).
Ob zwei Bluetooth-Geräte miteinander Daten austauschen können, ist abhängig vom Gerät und der jeweiligen Software
(z.B. von USB-Bluetooth-Adapter und Bluetooth-fähigem Mobiltelefon). Beachten Sie die Bedienungsanleitung der
anderen Bluetooth-Geräte.
Konformitätserklärung
Hiermit erklären wir, Conrad Elektronic, Klaus-Conrad-Straße 1, D-92240 Hirschau, dass sich dieses Produkt in Übereinstim-
mung mit den grundlegenden Anforderungen und den anderen relevanten Vorschriften der Richtlinie 1999/5/EG befindet.
Die Konformitätserklärung zu diesem Produkt finden Sie unter www.conrad.com.
Entsorgung
Entsorgen Sie das Produkt am Ende seiner Lebensdauer gemäß den geltenden gesetzlichen Bestimmun-
gen.
Diese Bedienungsanleitung ist eine Publikation der Conrad Electronic GmbH, Klaus-
Conrad-Straße 1, D-92240 Hirschau.
Diese Bedienungsanleitung entspricht dem technischen Stand bei Druck-legung.
Änderungen in Technik und Ausstattung vorbehalten.
© 2006 by Conrad Electronic GmbH. Printed in Germany.
w w w. c o n r a d . c o m
IR-Bluetooth-USB-Adapter
Version 01/06
Item No. 97 32 95
Prescribed Use
The product is designed to be connected to a USB port of a computer (or to a USB hub which is connected to the computer).
It serves to establish a radio connection with other suitable Bluetooth devices or to transmit data via IR light signals.
All company names and product designations contained herein are trademarks of the respective owners. All
rights are reserved.
Included in Delivery
Adapter
CD with driver/software
USB extension cable
Operating instructions
Features
USB-connection, USB1.1
Simultaneous operation of Bluetooth and IR possible
Bluetooth V1.2, Class II, up to a range of 10m max.
IR transmission, max. 115.2KBit (SIR), range max. 1m
Installation of the Driver/Software
Place the CD in the corresponding drive of your computer. In the directory "Bluetooth" change to directory "USB". Start
the "Setup.exe" program and follow all the instructions. This installs all the files which are necessary for Bluetooth.
Re-start Windows.
After the operating system had been charged, connect the USB adapter to a free USB port of your computer.
Windows will then recognise the new hardware. Install the IR driver.
The drivers necessary for Windows are in the directory "S110 \ IRDA" . Follow all instructions of Windows.
Once the drivers have been installed, Bluetooth as well as IR devices can be used.
Tips & notes
Under DOS or in the protected mode of Windows, USB does not function (or only in a limited way for USB keyboard/mouse).
The USB adapter can not be used here.
The given range of up to 10m ("ClassII") is the free view range, i.e. with visual contact between sender and receiver (from
one bluetooth device to another). But in practice, walls, ceilings etc. between the transmitter and receiver may affect and
reduce the range.
Other causes for reduced range:
-
-
-
-
-
-
In the IR mode, a direct visual contact must exist between the IR light-emitting diodes and the devices which you are using
(e.g. cell phone with IR). Place the device in such a way that its IR opening is directed towards the IR opening on the USB
adapter. The distance should not be bigger than approx. 0,5m (max. approx. 1m).
The exchange of data between two Bluetooth devices depends on the device and on the corresponding software (e.g. USB
Bluetooth adapter and Bluetooth compatible mobile telephone). Please follow the instructions of the user's manual of the
other Bluetooth devices.
Declaration of Conformity
We, Conrad Electronic, Klaus-Conrad-Straße 1, D-92240 Hirschau, hereby declare that this product complies with the
essential requirements and relevant regulations of the guideline 1999/5/EG.
Disposal
*2005/09/25mbe
© 2006 by Conrad Electronic GmbH. Printed in Germany.
O P E R A T I N G I N S T R U C T I O N S
Install FIRST the Bluetooth software of the provided CD. It is only AFTERWARDS that the USB
adapter can be connected to the computer.
High-frequency interference of all types (computers, monitors, cell phones)
Any housing and vegetation
Conductive metal parts which are located near the devices or within or near their transmission path, e.g. heaters,
metallic insulation glass windows, reinforced concrete ceilings etc.
There is an influence on the radiation pattern of antennas due to the distance from transmitter or receiver to conductive
surfaces or objects (to human bodies or ground also)
Broadband interference in urban areas which reduces the signal-to-noise-ratio; the signal will no longer be recognized
due to this "noise".
Interference radiation resulting from insufficiently shielded electronical devices, e.g. turned-on computers or the like.
The declaration of conformity of this product can be found at www.conrad.com.
At the end of its serviceable life, dispose of the product according to the relevant statutory requirements.
These operating instructions are published by Conrad Electronic GmbH, Klaus-
Conrad-Straße 1, D-92240 Hirschau/Germany.
These operating instructions reflect the current technical specifications at time of
print. We reserve the right to change the technical or physical specifiations.
w w w. c o n r a d . c o m
Version 01/06

Werbung

loading

Inhaltszusammenfassung für Conrad 97 32 95

  • Seite 1 (z.B. von USB-Bluetooth-Adapter und Bluetooth-fähigem Mobiltelefon). Beachten Sie die Bedienungsanleitung der Declaration of Conformity anderen Bluetooth-Geräte. We, Conrad Electronic, Klaus-Conrad-Straße 1, D-92240 Hirschau, hereby declare that this product complies with the Konformitätserklärung essential requirements and relevant regulations of the guideline 1999/5/EG.
  • Seite 2 Déclaration de conformité Conformiteitsverklaring Nous, Conrad Electronic, Klaus-Conrad-Straße 1, D-92240 Hirschau, déclarons par la présente que le présent produit est conforme aux exigences fondamentales et aux autres prescriptions applicables de la directive 1999/5/CE. Hierbij verklaren wij, Conrad Elektronic, Klaus-Conrad-Straße 1, D-92240 Hirschau, dat dit product in overeenstemming is met ...