Renkforce RS2W Bedienungsanleitung Seite 4

G Operating instructions
RS2W Mini wireless built dimmer, 2-wire
Item no. 1406726
Intended use
The built-in wireless built dimmer can be used to dim a connected light or switch it on
and off wirelessly using a suitable radio transmitter of the RS2W system.
The built-in wireless built dimmer is intended to be installed behind a normal wall
switch (no buttons!). The wall switch can still be used via two connection cables of
the built-in wireless dimmer switch; these cables also enable a dimming function.
The built-in wireless dimmer switch is suitable for use only on mains voltage (230 V/AC,
50 Hz). You can connect incandescent bulbs with a total power rating of 5 - 150 W or
energy-saving/LED bulbs with a total power rating of 5 - 20 W (as long as these are
dimmable).
The special design does not require a neutral conductor, which makes installation in
existing electric installations very easy.
Please read the operating instructions carefully and do not discard them. If you pass
the product on to a third party, please hand over these operating instructions as well.
Any use other than that described above could lead to damage to this product and
involves the risk of short circuits, fire, electric shock, etc. No part of the product may
be modified or converted! The safety instructions must be observed at all times!
This product complies with the applicable national and European requirements. All
names of companies and products are the trademarks of the respective owners. All
rights reserved.
Package contents
• Wireless built dimmer
• Operating instructions
Up-to-date operating instructions:
1. Open www.conrad.com/downloads in a browser or scan the
displayed QR code.
2. Select document type and language and enter the item num-
ber into the search field. After submitting the query you can
download displayed records.
Explanation of symbols, labels
The lightning symbol inside a triangle is used when there is a potential risk
of personal injury, such as electric shock.
This symbol points to specific risks associated with handling, function or
operation.
The arrow symbol indicates special tips and operating information.
The product may be used only in dry, indoor rooms; it must not get damp or
wet.
Observe the operating instructions!
Safety instructions
Read the complete operating manual carefully before using the product as
it contains important information about the correct installation and opera-
tion.
Damages due to failure to follow these operating instructions will void the
warranty! We do not assume any liability for any resulting damage!
We do not assume any liability for material and personal damage caused by
improper use or non-compliance with the safety instructions! In such cases,
the warranty will be null and void!
Warning!
This product may only be installed by a qualified technician (e.g., an elec-
trician) who is familiar with the relevant regulations (e.g., VDE)!
Improper work carried out on the mains voltage endangers not only your
own life, but also the life of others!
If you do not have the expertise required for the installation, do not install it
yourself but ask a qualified technician.
a) General
• The unauthorised conversion and/or modification of the product is not
permitted for safety and approval reasons (CE). Do not open/disassemble!
• The product is not a toy and does not belong in the hands of children.
There is a risk of a life-threatening electric shock!
• Do not leave the packaging material unattended since this may become a
dangerous plaything for children.
• Handle the product with care; it can be damaged by impacts, blows, or
accidental falls, even from a low height.
b) Operating location
• The product may be used in dry, enclosed indoor areas only; it must not
get damp or wet!
• Use the product only when it is securely installed and steady. Use the
product e.g. in a suitable flush-mounting or surface mounting or other suit-
able housing, so that the required protection against contact is ensured.
• The product must not be exposed to extreme temperatures, strong vibra-
tions or heavy mechanical stress. Keep the product away from strong
magnetic fields, such as in the vicinity of machinery, electric motors or
speakers.
• Do not operate the device in environments where there are high levels of
dust, flammable gases, vapours or solvents. There is a danger of fire and
explosion!
• Do not use this product in hospitals or medical institutions. Although the
transmitter of the RS2W radio system emits only relatively weak radio sig-
nals, these may lead to malfunction of life-sustaining systems. The same
may also apply to other areas.
c) Connection and operation
• This product should never be touched or operated with wet hands. There
is a risk of a life-threatening electric shock!
• Carry out the installation only when all the mains cables to the built-in
wireless dimmer switch are disconnected from the mains voltage. Other-
wise, there is a risk of a life-threatening electric shock!
• During installation, all poles must be disconnected from the mains voltage
(e.g. via RCD).
• Never connect the product to the power supply immediately after it has
been transferred from a cold room into a warm one (e.g. after transport).
The condensation that forms might destroy the device. Moreover, there is
danger of electric shock!
Allow the device to reach room temperature before switching it on. Wait
until the condensation has evaporated. This might take several hours.
Only after this should it be plugged in to the mains supply and put into use.
• Never overload the product. Note the maximum permissible connected
load in the chapter "Technical data".
• Do not use the product if it is damaged. There is a risk of a life-threatening
electric shock! In this case, dispose of the product in an environmentally
correct manner.