Product Description And Specifications; Noise/Vibration Information - Bosch GHG Professional 23-66 Originalbetriebsanleitung

OBJ_BUCH-3211-001.book Page 12 Wednesday, December 13, 2017 11:58 AM
12 | English
 Products sold in GB only: Your product is fitted with a
BS 1363/A approved electric plug with internal fuse
(ASTA approved to BS 1362).
If the plug is not suitable for your socket outlets, it should
be cut off and an appropriate plug fitted in its place by an
authorised customer service agent. The replacement plug
should have the same fuse rating as the original plug.
The severed plug must be disposed of to avoid a possible
shock hazard and should never be inserted into a mains
socket elsewhere.
Product Description and
Specifications
While reading the operating instructions, unfold the graphics
page for the machine and leave it open.
Intended Use
The power tool is intended for the forming and welding of
plastic, removal of paint and the warming of heat-shrinkable
tubing. It is also suitable for soldering and tinning, loosening
of adhesive joints and the defrosting of water lines.
Technical Data
Heat Gun
Article number
Rated power input
Air flow
Temperature at the nozzle outlet
Temperature-measuring accuracy
– at the nozzle outlet
– on the display
3)
Display operating temperature
Max. permissible ambient temperature during operation
Weight according to EPTA-Procedure 01:2014
Protection class
1) Maximum possible input power
2) At an ambient temperature of approx. 20 °C.
3) The display can turn black when not within the operating temperature.
The values given are valid for a nominal voltage [U] of 230 V. For different voltages and models for specific countries, these values can vary.

Noise/Vibration Information

Typically the A-weighted sound pressure level of the product
is lower than 70 dB(A).
Total vibration values a (triax vector sum) and uncertainty K:
h
2 2
a ≤2.5 m/s , K=1.5 m/s .
h
1 609 92A 3X6 | (13.12.17)
Product Features
The numbering of the product features refers to the illustra-
tion of the machine on the graphics page.
10 Fan button
11 Save button
12 Plus/minus button
13 Display
14 Wide jet nozzle*
15 Glass protection nozzle*
16 Angle nozzle*
17 Reflector nozzle*
18 Welding rod*
19 Welding shoe*
20 Reduction nozzle*
21 Heat-shrinkable sleeve*
*Accessories shown or described are not part of the standard
delivery scope of the product. A complete overview of accessories
can be found in our accessories program.
l/min 150/150–300/300–500 150–300/150–500
2)
Operation
Starting Operation
 Observe the mains voltage! The voltage of the power
1 Nozzle
2 Heat shield, removable
3 Standing surface
4 On/off switch and power settings
5 Memory preset
6 Temperature
7 Thermal-protection shut-off
8 Fan symbol
9 Airflow
GHG 20-63
3 601 BA6 2..
W 2000
°C 50–630
±10 %
±5 %
°C 0...+50
°C 40
kg 0.65
/II
source must correspond with the data on the type plate of
the machine.
GHG 23-66
3 601 BA6 3..
1)
2100 (2300 )
50–650
±10 %
±5 %
0...+50
40
0.67
/II
Bosch Power Tools