Operation; Operating Limits - OHAUS DEFENDER 3000 Bedienungsanleitung

DEFENDER 3000 Series Floor Scale

OPERATION

For setup, calibration and proper operation, refer to the instruction manual supplied with the indicator. Refer to the
specifications section of the floor scale for capacity, and readability information.

Operating Limits

Although the floor scales have extremely rugged construction, certain load limits must not be exceeded. Depending
on the type of loading, the maximum safe static load, i.e. the maximum admissible loading, is shown in Table 2.
Maximum Central Load
Model
DF1500BS
DF1500BR
DF1500BL
DF3000BL
DF1500BX
DF3000BX
DF3000BV
DF1500BRL
DF1500BLX
DF3000BLX
For continued best operating performance:
• Avoid falling loads, shocks and hard lateral impacts
• When weighing, all items should be centrally located on the floor scale and not
over hanging the sides or the ramps.
• Verify the calibration of the floor scale system at regular intervals.
TABLE 2. MAX ADMISSIBLE LOADING
1
(80% Surface Area)
2500 kg
2500 kg
2500 kg
3800 kg
2500 kg
3800 kg
3800 kg
2500 kg
2500 kg
3800 kg
Maximum side Load
2
(30% Surface Area)
1500 kg
1500 kg
1500 kg
1800 kg
1500 kg
1800 kg
1800 kg
1500 kg
1500 kg
1800 kg
One Side corner load
3
(10% Surface Area)
1000 kg
1000 kg
1000 kg
1200 kg
1000 kg
1200 kg
1200 kg
1000 kg
1000 kg
1200 kg
EN-5