Troubleshooting - Michelin 009523 Bedienungsanleitung

TROUBLE SHOOTING
Gauge does not light up
Check that the 12V power plug is fully inserted.
Ensure power light on the 12V power plug is illuminated. If power light is not
lit check power plug fuse (10 amp glass).
Your car may require the ignition key to be turned to the accessories position.
Unit runs hot
The unit should be allowed to cool for 10 minutes.
Never run the unit for more than 10 minutes.
Power lead/plug becomes hot
If power lead is coiled, uncoil to full length.
Unit is running but tyre is not inflating
Check that the thumb lock connector is correctly fitted to tyre valve.
To replace fuse in 12V plug
Undo knurled ring anticlockwise.
Replace fuse and knurled ring (max.10A).
Power indicator light
Anticlockwise
Fuse
GB
11