Set-Up Menu; Auto Start-Up; Timer Settings - Sony KDL-46V2000 Bedienungsanleitung

Set-up menu

Auto Start-up

Language
AV Preset
Auto S Video

Timer Settings

Starts the "first time operation menu" to select the language and country/region, and
tune in all available digital and analogue channels. Usually, you do not need to do
this operation because the language and country/region will have been selected and
channels already tuned when the TV was first installed (page 5, 6). However, this
option allows you to repeat the process (e.g., to retune the TV after moving house,
or to search for new channels that have been launched by broadcasters).
Selects the language in which the menus are displayed.
Assigns a name to any equipment connected to the side and rear sockets. The name
will be displayed briefly on the screen when the equipment is selected. You can skip
an input source that is not connected to any equipment.
1 F f
Press / to select the desired input source, then press
2
F f
Press / to select the desired option below, then press
Equipment labels: Uses one of the preset labels to assign a name to connected
equipment.
"Edit": Creates your own label. Follow steps 2 to 4 of "Programme Labels"
(page 28).
"Skip": Skips an input source that is not connected to any equipment when you press
to select the input source.
Selects the input signal from S video sockets
connected.
Sets the timer to turn on/off the TV.
Sleep Timer
Sets a period of time after which the TV automatically switches itself into standby
mode.
When the Sleep Timer is activated, the
up in orange.
Tips
• If you switch off the TV and switch it on again, "Sleep Timer" is reset to "Off".
• "TV will soon turn off by sleep timer." appears on the screen one minute before the TV
switches to standby mode.
You can select the options listed below on the Set-up
menu. To select options in "Settings", see "Navigating
through menus" (page 19).
5 when
(Timer) indicator on the TV (front) lights
.
.
/ 5 sockets are both
Continued
25
GB