Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
h) Manual temperature pre-selection
• Repeatedly press the "FUNC" button briefly until "MANU" appears in the display.
• Hold the "FUNC" button pressed (approx. 3 seconds) until the temperature flashes
on the left in the display.
• Select the desired temperature with the "+/ON" or "-/OFF" button. For quick adjust-
ment, press and hold down the corresponding button for longer.
• Press the "FUNC" button briefly to confirm.
Manual temperature pre-selection remains activated for the following
24 hours and then changes back to automatic operation.
i) Selecting the operating mode ("AUTO", "MANU", "CANCEL")
If the temperature controller is not in a setting mode, you can select the operating
mode by briefly pressing the "FUNC" button.
Operating mode "AUTO"
The temperature controller maintains the temperature automatically according to the
settings made for times/weekdays in the 8 programmes "PROG1" to "PROG8".
Operating mode "MANU"
The temperature controller maintains the temperature after activation of this operat-
ing mode for a duration of 24 hours and then changes back to automatic operation.
Operating mode "CANCEL"
The temperature controller is deactivated; a switching process is not executed.
j) Feedback on the switching process
A special feature of the RS2W radio switch system, to which the temperature control-
ler belongs, is that it provides feedback on the successful (or unsuccessful) switching
process.
The receiver sends information about reception and execution of the switching pro-
cess back to the sender. In this way, you can always see if the radio receiver (e.g. a
radio switch socket) has executed the switching command or not.
The temperature controller indicates this with double arrows:
"
" Switching process successful, feedback received
"
" No feedback received from the receiver
A reason for missing feedback could be interferences at the same frequen-
cy, unfavourable reception conditions or similar (see next chapter "Range")
or the receiver is not connected to the mains.
k) Installation/positioning of the temperature controller
The temperature controller can be hung from a nail, hook or screw in a wall, using an
opening on the back.
Alternatively, unfold the mounting foot at the back and position the temperature con-
troller on a level, stable surface. Protect valuable furniture surfaces by using a suita-
ble mat to prevent scratch marks.
For operation, choose a place that is not directly exposed to the sun and not
located close to a radiator. This will result in an erroneous temperature or
humidity display as well as to an erroneous control of the heating or cooling
device connected to the receiver.
Range
The transmission range of the radio signals between the temperature controller and
the receiver is up to 150 m under optimum conditions.
This value, however, is the so-called "open space range" (the range when
transmitter and receiver are in line of sight, without any interference).
In practice, however, there may be walls, room ceilings, etc. between the transmitter
and the receiver, which will reduce the range accordingly.
Due to the different influences on the radio transmission, no specific range can be
guaranteed. However, trouble-free operation is usually possible in a single family
house.
Sometimes the range can be considerably reduced due to:
• Walls, reinforced concrete floors, drywall walls with metal frame construction
• Coated/metallised insulated glass
• Proximity to metallic & conductive objects (e.g., heating elements)
• Proximity to human bodies
• Other devices on the same frequency (e.g. wireless headphones, wireless speakers)
• Proximity to electric motors/appliances, transformers, power supplies, computers
Declaration of conformity (DOC)
We, Conrad Electronic SE, Klaus-Conrad-Straße 1, D-92240 Hirschau, hereby declare
that this product conforms to the fundamental requirements and other relevant regu-
lations of the 1999/5/EC directive.
The Declaration of Conformity for this product is available at:
www.conrad.com
Maintenance and cleaning
The product does not require any maintenance by the user; do not open/disassemble
it (except for replacing the batteries). Repair or maintenance work must be carried
out by a specialist.
You can use a clean, dry, soft cloth for cleaning. Dust can be very easily removed with
a soft, clean brush and a vacuum cleaner.
Do not use aggressive chemical or scouring cleaning agents, as this may lead to dis-
colouration or changes in the material on the surface.
Do not press on the display, it could be damaged.
Disposal
a) General
The product must not be disposed of in household waste!
Please dispose of the device, when it is no longer of use, according to cur-
rent statutory requirements.
Remove any inserted batteries/rechargeable batteries and dispose of them
separately from the product.
b) Batteries and rechargeable batteries
As the end user, you are required by law (Battery Regulation) to return used batteries.
Do not dispose of used batteries in the household waste!
Batteries/rechargeable batteries containing hazardous substances are la-
belled with these symbols to indicate that the disposal of them in the house-
hold waste is forbidden. The symbols for dangerous heavy metal constitu-
ents are: Cd=Cadmium, Hg=Mercury, Pb=Lead (name written on the battery/
rechargeable battery, e.g., under the rubbish bin symbol on the left).
You can return your used batteries/rechargeable batteries free of charge at the official
collection points of your community, in our stores, or at places where batteries or
rechargeable batteries are sold.
You thereby fulfil your statutory obligations and contribute to the protection of the
environment.
Technical data
Power supply ..........................................2x batteries of type AAA/Micro
Transmission/ reception frequency .....868.3 MHz
Temperature control range ..................0 °C to +50 °C
Switching programmes ......................... 8 (daily, weekdays or entire week can be selected)
Range .......................................................up to 150 m (see chapter "Range")
Suitable receivers .................................. Radio switches of the RS2W radio switch sys-
Number receivers ..................................1
Ambient conditions ................................ Temperature -9 °C to +55 °C, air humidity 20% to
Dimensions (H x W x D).........................102 x 53 x 18 mm
Weight ......................................................approx. 73 g (without batteries)
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in electronic data
processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited. This publication represent
the technical status at the time of printing.
© Copyright 2016 by Conrad Electronic SE.
tem (a dimmer cannot be used!)
95% relative, not condensing
Werbung
Inhaltsverzeichnis
