Herunterladen Inhalt Inhalt Diese Seite drucken

Intended Use; Package Contents; Explanation Of Symbols, Labels; Safety Instructions - Renkforce MH-850T Bedienungsanleitung

Raumthermostat zwischenstecker
Vorschau ausblenden Andere Handbücher für MH-850T:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Operating instructions
Room thermostat adapter plug „MH-850T"
Item no. 1323077

Intended use

The product is used to automatically turn on/off an electric load (e.g. heater or air conditioner)
when the temperature is below/above a certain level.
The product must be connected to a mains socket with earth contact. See chapter "Technical
data" for information on connection and the maximum permissible power consumption of the
connected electrical loads.
Always observe the safety instructions and all other information included in these operating
instructions. Read the operating manual carefully; keep it in a safe place or pass it on to others
using the product.
Any use other than that described above could lead to damage to this product and involves
the risk of short circuits, fire, electric shock, etc. No part of the product may be modified or
converted!
This product complies with the applicable national and European requirements. All names of
companies and products are the trademarks of the respective owners. All rights reserved.

Package contents

• Room thermostat
• Warning sticker in English/Dutch language
• Operating instructions
Up-to-date operating instructions
Download the up-to-date operating instructions at www.conrad.com/downloads or scan the QR
code shown. Follow the instructions on the website.

Explanation of symbols, labels

The lightning symbol inside a triangle is a warning to inform you of potential risks of
personal injury, such as electrical shock.
This symbol indicates specific risks associated with handling,
function and use.
The "arrow" symbol points to special tips and operating information.
The product may only be used in dry, indoor rooms;
it must not get damp or wet.
Observe the operating instructions!

Safety instructions

Damage due to failure to follow these operating instructions will void the war-
ranty! We do not assume any liability for any resulting damage!
We do not assume any liability for material and personal damage caused by
improper use or non-compliance with the safety instructions! In such cases,
the warranty will be null and void!
a) General
• The unauthorised conversion and/or modification of the product is not permitted
for safety and approval reasons. Do not open/disassemble! Contains no custo-
mer-serviceable parts.
Maintenance, adjustment or repair work may only be carried out by an expert/
authorised service centre, who/which is familiar with the hazards involved and the
relevant regulations.
• The product is designed according to protection class I. It may only be used when
connected to an earthed mains socket.
• The outlet socket used for the connection of the product must be located in direct
proximity to the product and be easily accessible.
• The product is equipped with a protection against accidental contact. An integra-
ted mechanism will release the holes of the receptacle only, if the two prongs of a
power plug are inserted into the two holes at once.
• Take special caution when children are around. Children cannot recognize the
danger arising from the incorrect use of electrical devices. There is a risk of a
life-threatening electric shock!
• Do not carelessly leave the packaging material lying around since this may be-
come a dangerous toy for children.
• Handle the product with care; it may be damaged by impacts, blows, or accidental
falls, even from a low height.
• In commercial institutions, the accident prevention regulations of the Employer's
Liability Insurance Association for Electrical Systems and Operating Facilities are
to be observed!
• If you have any questions that are not answered in these operating instructions,
please contact our technical department or another specialist.
b) Operating location
• The product may be used in dry, enclosed indoor areas only; it must not get damp
or wet! Never set up the product in the direct vicinity of a bathroom, shower, bath-
tub or similar. There is a risk of a life-threatening electric shock!
• The product is not a toy and does not belong in the hands of children. Position the
product so it is out of the reach of children.
• The product must not be exposed to extreme temperatures, direct sunlight or
strong vibrations.
• Do not operate the device in environments where there are high levels of dust,
flammable gases, vapours or solvents. There is a danger of fire and explosion!
• Never operate the room thermostat in a vehicle.
c) Handling and use
• Never touch the product, or the mains plug with wet or damp hands when trying
to connect a plug to the front socket of the room thermostat. There is danger of a
life-threatening electric shock! The same applies to the room thermostat itself.
• Do not connect the product to the power supply immediately after it has been
transferred from a cold room into a warm one (e.g., during transport). The conden-
sation that develops in such cases could damage the device or cause an electric
shock! Allow the product to reach room temperature. Wait until the condensation
has evaporated. This might take several hours. Only after this should the product
be plugged into the power supply and put into use.
• Never pull out a mains plug that is connected to the front outlet of the room ther-
mostat by pulling on its cable. Always pull the plug out of the front socket by
gripping the area provided for this purpose on its sides.
• Do not overload the room thermostat. Observe the connected load in the chapter
"Technical data".
• Do not connect in series! This can lead to overloading of the room thermostat!
There is a risk of fire!
• Do not operate while it is covered! At higher connected loads, the room thermostat
will get hot, which may lead to overheating posing a risk of fire, if it is covered!
• Current-free only when the plug is withdrawn!
• Do not use the product if it is damaged. There is a risk of a life-threatening electric
shock!
In this case, dispose of the product in an environmentally correct manner.
- Safe operation can no longer be assumed if:
- the product shows visible signs of damage
- the product does not work at all or works poorly (leaking smoke or a smell of
burning, audible cracking noises, discolouration to the product or the adjacent
surfaces)
- the product was stored under unfavourable conditions
- it was exposed to heavy stresses during transport
• Use the product only in a temperate climate, never in a tropical climate.
• Always unplug the room thermostat from the mains socket before cleaning it or
when the device is not be used for a long time.
• Never pour any liquids above or next to the product. You run the risk of causing a
fire or a fatal electric shock.
If any liquid has still happened to enter the device, immediately turn off the power
supply to the mains socket to which the room thermostat is connected (turn off
the fuse/circuit breaker/residual current operated circuit breaker of the associated
circuits). Only then can you unplug the room thermostat from the mains socket
and contact a specialist. Do not use the product any longer.

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis