Save The Coffee Quantity; Set The Grinding Degree - CASO DESIGN Café Crema One Original Bedienungsanleitung

Place a vessel under the coffee outlet. Fill coffee beans into the bean container and
replace the lid correctly. Press
is dispensed from the coffee outlet. Then pour the rinse water away. Clean your vessel
and place it under the coffee outlet once more.
Press the espresso or
► Use only cold water.
► Tip: Pre-heat the cup if you want to enjoy your coffee at as hot a temperature as
possible.
► Do not exceed the maximum amount of water indicated on the scale of water tank.
► Wait a few minutes before brewing coffee again.

13.6 Save the coffee quantity

Press the espresso or
on the button until the desired amount of espresso / coffee has been brewed. Release the
button. The quantity is saved.
► Please ensure that the espresso / coffee or water does not overflow. You can stop the
flow by pressing the button once more.

13.7 Set the grinding degree

► Only adjust the grinding degree if the appliance is grinding coffee beans, otherwise the
grinder may be damaged
► A finer degree of grinding is recommended for a lighter roast. A coarser degree of
grinding is recommended for a darker roast.
Place a vessel under the coffee outlet.
Open the bean container lid. Proceed as described in "Preparation of
espressos and coffee".
Wait until the appliance grinds the beans. Set the grinder knob to the
desired level. Reattach the lid of the bean container.
to turn on the device. The appliance rinses and water
coffee switch and espresso or coffee are dispensd.
Please note
coffee button once, press again and leave your finger
Please note
Please note
50