VOLTCRAFT 4500ADVANCED Bedienungsanleitung Seite 38

• "TARIFF 1" appears in the upper display, the electricity tariff can now be set.
If you only have one electricity tariff with your electricity company, enter the same price
for both electricity tariffs ("TARIFF 1" and "TARIFF 2"). The starting time does not matter
since the electricity costs are the same.
If you have two different electricity tariffs (e.g. day-time electricity and night-time electric-
ity), set the price for the day-time tariff ("TARIFF 1") and the starting time for this tariff
(e.g. 06:00) first and then the price for night-time electricity and its starting time (e.g.
22:00) for the second electricity tariff ("TARIFF 2").
Possible special times for switching between day-time and night-time electricity (week-
ends, public holidays) cannot be included in the measuring device. Therefore, there will
be slight differences between the actual costs and the costs displayed by the measuring
device.
• Briefly press the "SET" (1) button, the currency symbol flashes.
• Set the desired currency ("€", "$", "£" or "CHF") with the "
• Press the "SET" button (1) briefly.
• The first position of the electricity price for tariff 1 flashes.
Change the numeric value of the flashing input position with the "
Briefly press the "SET" (1) button to confirm and the next input position will be activated.
After confirming the last input position, the hours of the starting time for electricity tariff 1 (for
example day-time electricity) flash.
• Set the hours of the starting time for electricity tariff 1 with the "
• Briefly press the "SET" (1) button, the minutes of the starting time for electricity tariff 1 flash.
• Set the minutes of the starting time for electricity tariff 1 with the "
button.
• Press the "SET" button (1) to confirm and "TARIFF 2" will appear in the display; the second
electricity tariff can now be set (e.g. night-time electricity).
• The first position of the electricity price for tariff 2 flashes.
Change the numeric value of the flashing input position with the "
Briefly press the "SET" (1) button to confirm and the next input position will be activated.
38
" (4) or " " (5) button.
" (4) or " " (5) button.
" (4) or " " (5) button.
" (4) or "
" (4) or " " (5) button.
" (5)