Bosch GLM 50 C Professional Originalbetriebsanleitung Seite 40

OBJ_BUCH-2450-001.book Page 40 Wednesday, April 29, 2015 9:07 AM
40 | English
Inclination Measurement/Digital Spirit Level
Select the inclination measurement/digital spirit level
The measuring tool automatically switches between two states.
The digital spirit level is used to check the horizontal or vertical align-
ment of an object (e.g. washing machine, refrigerator, etc.).
When the inclination 4° exceeds, the ball in the display lights red.
1°2°3°
Inclination measurement is used to measure a slope or incline (e.g. of
stairs, railings, when fitting furniture, laying pipes, etc.).
The left or right side of the measuring tool serves as the reference level
for the inclination measurement. If the display flashes during the meas-
urement, the measuring tool has been tipped too heavily to the side.
Memory Functions
The value or end result of each completed measurement is automatically saved.
Memory value display
Maximum 30 values (measured values or end results) can be retrieved.
Select the memory function
The number of the memory value is shown at the top of the display, the
4
corresponding memory value is shown at the bottom and the corre-
6.350 m
sponding measuring function is shown on the left.
7.620 m
8.890 m
Press button 3 [+] to browse forwards through the saved values.
430.16 m
3
Press button 8 [–] to browse backwards through the saved values.
If there is no value available in the memory, "0.000" is shown at the bottom of the dis-
play and "0" at the top.
The oldest value is located in position 1 in the memory, while the newest value is in
position 30 (when 30 memory values are available). When a further value is saved,
the oldest value in the memory is always deleted.
Deleting the Memory
To delete the content of the memory, press button 7 [Func] and select the memory
function . Then briefly press the On/Off button 5 [
ue.
Simultaneously pressing the button 4 and the On/Off button 5 [
stored in the memory.
2 609 141 257 | (29.4.15)
.
] to delete the displayed val-
.
] deletes all values
Bosch Power Tools