Package Contents; Safety Instructions - Renkforce DS-1190 Bedienungsanleitung

G Operating Instructions
DS-1190 Bluetooth Speaker
Item no. 1230940 (black)
Item no. 1230941 (grey)
Intended use
The BT is used for the playback of music over coupled Bluetooth
features a built-in Bluetooth speakerphone.
®
Power is supplied by the built-in rechargeable battery. This may be charged only via
a suitable USB connection.
Use other than that described above will lead to damage to the product and will ex-
pose you to additional risks, such as short circuits, fire, electrical shocks etc.
No part of the product may be modified or converted.
Always observe the safety instructions and all other information included in these op-
erating instructions.
This product complies with the applicable national and European regulations. All com-
pany and product names are the trademarks of their respective owners. All rights
reserved.
Package contents
• BT Speaker
• Set of connector cables
• Operating instructions
Explanation of symbols
This symbol indicates specific risks associated with handling, function and
use.
The arrow symbol indicates special information and advice on operating the
device.
Safety instructions
F irst, read the complete operating instructions carefully, as they contain
important information about proper operation of the device.
D amage due to failure to follow these operating instructions will void the
warranty! We do not assume any liability for any consequential damage!
W e do not assume any liability for material and personal damage caused by
improper use or non-compliance with the safety instructions. In such cases
any warranty claim is invalid.
• For safety reasons, any unauthorised conversion and/or modification to
the product is not permitted.
• The speaker's rechargeable battery may be charged only via a suitable
USB connection.
• Do not expose the product to high temperatures, strong, vibrations, mois-
ture or humidity, and heavy mechanical loads.
• Check the device for damage occasionally. Do not use the product any
longer if it shows any sign of damage, but rather take it to a specialist
workshop.
• Do not place open flames such as burning candles on the device or in its
immediate vicinity.
• Use the device only in temperate climate regions and not in tropical ones.
• This product is not a toy; it is not suitable for children. Children are not
aware of the potential dangers involved when using electrical devices.
• Do not leave packaging material unattended. It may become a dangerous
plaything for children.
• Consult an expert, if you are unsure how the equipment should be con-
nected, operated, or in terms of safety.
• Also observe any further safety instructions in the individual chapters of
these operating instructions.
Controls and parts
devices. It also
®
(1) Button
(2) Volume control
(3) Button
(4) Button
(5) MODE button
Getting started and operation
Recharging the battery
T he USB connection at which the device is charged must have a power
rating of at least 500 mA. This is normally assured at every USB connection
of computers.
Prior to initial operation, the built-in rechargeable battery must first be
charged.
• Connect the USB connection (9) to a USB port using the included USB cable.
• The LED charging (10) will display the state of charge:
Red: battery is charging
Green: the speaker's battery is charged
Switching on or off
• Press down the POWER button (6) for about three seconds to turn the speaker on.
• The speaker acknowledged start-up by a corresponding voice output.
• Volume control (2) is now flashing blue.
• To switch the device off, press the POWER button again (6) for about three seconds.
1 2 3 4
6 7 8 9 10
(6) POWER button
(7) LINE IN connector
(8) card reader
(9) USB connection
(10) LED charging
5