Bosch PTK 3,6 LI Originalbetriebsanleitung Seite 27

Battery Charge Indicator
Battery
Charging
Operation
Note: The power tool cannot be used during the charge procedure; it is
not defective when inoperative during the charging procedure.
During the charging procedure, the handle of the machine warms up. This
is normal.
Disconnect the battery charger from the mains supply when not using it
for longer periods.
Protect the battery charger against moisture!
Observe the notes for disposal.
Loading the Magazine (see figure B)
Use only original Bosch accessories. The precision parts of the pow-
er tool, such as the magazine, the striker and the shot duct, are
matched to Bosch staples. Other manufacturers use other steel quali-
ties and sizes.
– Turn the power tool around.
– Press release buttons 6 and pull out the magazine 10 toward the rear.
– Insert the staple strip 9.
– Insert the magazine 10 again until it engages.
Do not exert any force when opening, loading and inserting the
magazine.
Bosch Power Tools
red green
–
–
–
–
Flashing Continuous light
Meaning
The battery is being charged
The battery is fully charged
The battery has more than 30%
of its capacity
The battery has less than 30% of
its capacity and should be
charged
1 619 929 L03 | (16.3.12)
English | 27