Battery Charge Indicator - Philips sonicare Elite HX7551 Bedienungsanleitung

A distinctive two-tone beep indicates the speed setting has been
changed.
It is recommended that you brush at the Normal speed setting to
maintain optimal results.
The Normal speed setting should be selected when the Sonicare is
used in clinical trials.

Battery charge indicator

C
If the battery charge of your Sonicare is low, you will hear 3 beeps
after you have brushed your teeth for 2 minutes and the charge
indicator LED will blink yellow for 30 seconds.
When you hear the low charge indication, you have 3 or fewer 2-
minute brushings left.
Keep the Sonicare in the charger when not in use to maintain a full
battery charge.
Charge indicator (models 7800 and 7500)
When the handle is placed in the charger, the green charge
indicator LEDs will blink in a rising pattern as the battery charges.
The number of blinking LEDs indicates the level to which the
battery has been charged.
When the battery reaches full charge, the LEDs stop blinking and start
to burn continuously. About once a minute, the charge indicator LEDs
go out momentarily and then go back on.This indicates that the
battery is being maintained at full charge.The full charge indication will
persist until the handle is removed from the charger.
The blinking yellow LED indicates that fewer than 3 brushings remain.
Charge Indicator (model 7300)
C
When the handle is placed in the charger, the charge indicator
LED will blink green as the battery charges.When the battery
reaches full charge, the charge indicator LED will burn green
continuously until the handle is removed from the charger.
When your Sonicare is switched on or off, the charge indicator LED
will blink yellow if the battery charge is low.
ENGLISH
11